8i | 9i | 10g | 11g | 12c | 13c | 18c | 19c | 21c | 23c | Misc | PL/SQL | SQL | RAC | WebLogic | Linux

Home » Articles » 11g » Here

Oracle 11g Release 1 RAC On Linux Using NFS

This article describes the installation of Oracle 11g release 1 (11.1 32-bit) RAC on Linux (Oracle Enterprise Linux 5.0 32-bit) using NFS to provide the shared storage.

Introduction

NFS is an abbreviation of Network File System, a platform independent technology created by Sun Microsystems that allows shared access to files stored on computers via an interface called the Virtual File System (VFS) that runs on top of TCP/IP. Computers that share files are considered NFS servers, while those that access shared files are considered NFS clients. An individual computer can be either an NFS server, a NFS client or both.

We can use NFS to provide shared storage for a RAC installation. In a production environment we would expect the NFS server to be a NAS, but for testing it can just as easily be another server, or even one of the RAC nodes itself.

To cut costs, this articles uses one of the RAC nodes as the source of the shared storage. Obviously, this means if that node goes down the whole database is lost, so it's not a sensible idea to do this if you are testing high availability. If you have access to a NAS or a third server you can easily use that for the shared storage, making the whole solution much more resilient. Whichever route you take, the fundamentals of the installation are the same.

This article was inspired by the blog postings of Kevin Closson.

Assumptions. You need two machines available to act as your two RAC nodes. They can be physical or virtual. In this case I'm using two virtual machines called "rac1" and "rac2". If you want a different naming convention or different IP addresses that's fine, but make sure you stay consistent with how they are used.

Download Software

Download the following software.

Operating System Installation

This article uses Oracle Enterprise Linux 5.0, but it will work equally well on CentOS 5 or Red Hat Enterprise Linux (RHEL) 5. A general pictorial guide to the operating system installation can be found here. More specifically, it should be a server installation with a minimum of 2G swap, firewall and secure Linux disabled. Oracle recommend a default server installation, but if you perform a custom installation include the following package groups:

To be consistent with the rest of the article, the following information should be set during the installation.

RAC1.

RAC2.

You are free to change the IP addresses to suit your network, but remember to stay consistent with those adjustments throughout the rest of the article.

Once the basic installation is complete, install the following packages whilst logged in as the root user.

# From Enterprise Linux 5 Disk 1
cd /media/cdrom/Server
rpm -Uvh binutils-2.*
rpm -Uvh elfutils-libelf-0.*
rpm -Uvh glibc-2.*
rpm -Uvh glibc-common-2.*
rpm -Uvh libaio-0.*
rpm -Uvh libgcc-4.*
rpm -Uvh libstdc++-4.*
rpm -Uvh make-3.*
cd /
eject

# From Enterprise Linux 5 Disk 2
cd /media/cdrom/Server
rpm -Uvh compat-libstdc++-33*
rpm -Uvh elfutils-libelf-devel-*
rpm -Uvh glibc-headers*
rpm -Uvh glibc-devel-2.*
rpm -Uvh libgomp*
rpm -Uvh gcc-4.*
rpm -Uvh gcc-c++-4.*
rpm -Uvh libaio-devel-0.*
rpm -Uvh libstdc++-devel-4.*
rpm -Uvh unixODBC-2.*
rpm -Uvh unixODBC-devel-2.*
cd /
eject

# From Enterprise Linux 5 Disk 3
cd /media/cdrom/Server
rpm -Uvh sysstat-7.*
cd /
eject

Oracle Installation Prerequisites

Perform the following steps whilst logged into the RAC1 virtual machine as the root user.

The "/etc/hosts" file must contain the following information.

127.0.0.1       localhost.localdomain   localhost
# Public
192.168.2.101   rac1.localdomain        rac1
192.168.2.102   rac2.localdomain        rac2
#Private
192.168.0.101   rac1-priv.localdomain   rac1-priv
192.168.0.102   rac2-priv.localdomain   rac2-priv
#Virtual
192.168.2.111   rac1-vip.localdomain    rac1-vip
192.168.2.112   rac2-vip.localdomain    rac2-vip
#NAS
192.168.2.101   nas1.localdomain        nas1

Notice that the NAS1 entry is actually pointing to the RAC1 node. If you are using a real NAS or a third server to provide your shared storage put the correct IP address into the file.

Add the following lines to the "/etc/sysctl.conf" file.

kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default=4194304
net.core.rmem_max=4194304
net.core.wmem_default=262144
net.core.wmem_max=262144

# Additional and amended parameters suggested by Kevin Closson
#net.core.rmem_default = 524288
#net.core.wmem_default = 524288
#net.core.rmem_max = 16777216
#net.core.wmem_max = 16777216
net.ipv4.ipfrag_high_thresh=524288
net.ipv4.ipfrag_low_thresh=393216
net.ipv4.tcp_rmem=4096 524288 16777216
net.ipv4.tcp_wmem=4096 524288 16777216
net.ipv4.tcp_timestamps=0
net.ipv4.tcp_sack=0
net.ipv4.tcp_window_scaling=1
net.core.optmem_max=524287
net.core.netdev_max_backlog=2500
sunrpc.tcp_slot_table_entries=128
sunrpc.udp_slot_table_entries=128
net.ipv4.tcp_mem=16384 16384 16384

Run the following command to change the current kernel parameters.

/sbin/sysctl -p

Add the following lines to the "/etc/security/limits.conf" file.

oracle               soft    nproc   2047
oracle               hard    nproc   16384
oracle               soft    nofile  1024
oracle               hard    nofile  65536

Add the following line to the "/etc/pam.d/login" file, if it does not already exist.

session    required     pam_limits.so

Disable secure linux by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as follows.

SELINUX=disabled

Alternatively, this alteration can be done using the GUI tool (System > Administration > Security Level and Firewall). Click on the SELinux tab and disable the feature.

Create the new groups and users.

groupadd oinstall
groupadd dba
groupadd oper
groupadd asmadmin

useradd -u 500 -g oinstall -G dba,oper,asmadmin oracle
passwd oracle

Configure SSH on each node in the cluster. Log in as the "oracle" user and perform the following tasks on each node.

su - oracle
mkdir ~/.ssh
chmod 700 ~/.ssh
/usr/bin/ssh-keygen -t rsa # Accept the default settings.

The RSA public key is written to the "~/.ssh/id_rsa.pub" file and the private key to the "~/.ssh/id_rsa" file.

Log in as the "oracle" user on RAC1, generate an "authorized_keys" file on RAC1 and copy it to RAC2 using the following commands.

su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac2:/home/oracle/.ssh/

Next, log in as the "oracle" user on RAC2 and perform the following commands.

su - oracle
cd ~/.ssh
cat id_rsa.pub >> authorized_keys
scp authorized_keys rac1:/home/oracle/.ssh/

The "authorized_keys" file on both servers now contains the public keys generated on all RAC nodes.

To enable SSH user equivalency on the cluster member nodes issue the following commands on each node.

ssh rac1 date
ssh rac2 date
ssh rac1.localdomain date
ssh rac2.localdomain date
exec /usr/bin/ssh-agent $SHELL
/usr/bin/ssh-add

You should now be able to SSH and SCP between servers without entering passwords.

Login as the oracle user and add the following lines at the end of the ".bash_profile" file.

# Oracle Settings
TMP=/tmp; export TMP
TMPDIR=$TMP; export TMPDIR

ORACLE_HOSTNAME=rac1.localdomain; export ORACLE_HOSTNAME
ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
ORACLE_HOME=$ORACLE_BASE/product/11.1.0/db_1; export ORACLE_HOME
ORACLE_SID=RAC1; export ORACLE_SID
ORACLE_TERM=xterm; export ORACLE_TERM
PATH=/usr/sbin:$PATH; export PATH
PATH=$ORACLE_HOME/bin:$PATH; export PATH

LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib; export LD_LIBRARY_PATH
CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib; export CLASSPATH

if [ $USER = "oracle" ]; then
  if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 65536
  else
    ulimit -u 16384 -n 65536
  fi
fi

Remember to set the correct values for the ORACLE_SID and ORACLE_HOSTNAME on the second node.

Create Shared Disks

First we need to set up some NFS shares. In this case we will do this on the RAC1 node, but you can do the on a NAS or a third server if you have one available. On the RAC1 node create the following directories.

mkdir /shared_config
mkdir /shared_crs
mkdir /shared_home
mkdir /shared_data

Add the following lines to the "/etc/exports" file.

/shared_config               *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
/shared_crs                  *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
/shared_home                 *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
/shared_data                 *(rw,sync,no_wdelay,insecure_locks,no_root_squash)

Run the following command to export the NFS shares.

chkconfig nfs on
service nfs restart

On both RAC1 and RAC2 create the directories in which the Oracle software will be installed.

mkdir -p /u01/app/crs/product/11.1.0/crs
mkdir -p /u01/app/oracle/product/11.1.0/db_1
mkdir -p /u01/oradata
mkdir -p /u01/shared_config
chown -R oracle:oinstall /u01/app /u01/app/oracle /u01/oradata /u01/shared_config
chmod -R 775 /u01/app /u01/app/oracle /u01/oradata /u01/shared_config

Add the following lines to the "/etc/fstab" file. The mount options are suggestions from Kevin Closson.

nas1:/shared_config /u01/shared_config  nfs  rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,wsize=32768,actimeo=0  0 0
nas1:/shared_crs    /u01/app/crs/product/11.1.0/crs  nfs  rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,wsize=32768,actimeo=0  0 0
nas1:/shared_home   /u01/app/oracle/product/11.1.0/db_1  nfs  rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,wsize=32768,actimeo=0  0 0
nas1:/shared_data   /u01/oradata  nfs  rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,wsize=32768,actimeo=0  0 0

Mount the NFS shares on both servers.

mount /u01/shared_config
mount /u01/app/crs/product/11.1.0/crs
mount /u01/app/oracle/product/11.1.0/db_1
mount /u01/oradata

Create the shared OCR Configuration and Voting Disk files.

touch /u01/shared_config/ocr_configuration
touch /u01/shared_config/voting_disk

Make sure the permissions on the shared directories are correct.

chown -R oracle:oinstall /u01/shared_config
chown -R oracle:oinstall /u01/app/crs/product/11.1.0/crs
chown -R oracle:oinstall /u01/app/oracle/product/11.1.0/db_1
chown -R oracle:oinstall /u01/oradata

Before installing the clusterware, check the prerequisites have been met using the "runcluvfy.sh" utility in the clusterware root directory.

/mountpoint/clusterware/runcluvfy.sh stage -pre crsinst -n rac1,rac2 -verbose

If you get any failures be sure to correct them before proceeding.

Install the Clusterware Software

Unzip the clusterware and database software.

unzip linux_11gR1_clusterware.zip
unzip linux_11gR1_database.zip

Login to RAC1 as the oracle user and start the Oracle installer.

cd clusterware
./runInstaller

On the "Welcome" screen, click the "Next" button.

Clusterware Welcome

Accept the default inventory location by clicking the "Next" button.

Clusterware Inventory

Enter the appropriate name and path for the Oracle Home and click the "Next" button.

Clusterware Oracle Home

Wait while the prerequisite checks are done. If you have any failures correct them and retry the tests before clicking the "Next" button.

Clusterware Prerequisites

The "Specify Cluster Configuration" screen shows only the RAC1 node in the cluster. Click the "Add" button to continue.

Clusterware Cluster Config

Enter the details for the RAC2 node and click the "OK" button.

Clusterware Cluster Config Add

Click the "Next" button to continue.

Clusterware Cluster Config

The "Specific Network Interface Usage" screen defines how each network interface will be used. Highlight the "eth0" interface and click the "Edit" button.

Clusterware Network Interface Usage

Set the "eht0" interface type to "Public" and click the "OK" button.

Clusterware Network Interface Eth0 Type

Leave the "eth1" interface as private and click the "Next" button.

Clusterware Network Interface Usage

Click the "External Redundancy" option, enter "/u01/shared_config/ocr_configuration" as the OCR Location and click the "Next" button. To have greater redundancy we would need to define another shared disk for an alternate location.

Clusterware OCR Location

Click the "External Redundancy" option, enter "/u01/shared_config/voting_disk" as the Voting Disk Location and click the "Next" button. To have greater redundancy we would need to define another shared disk for an alternate location.

Clusterware Voting Disk Location

On the "Summary" screen, click the "Install" button to continue.

Clusterware Summary

Wait while the installation takes place.

Clusterware Install

Once the install is complete, run the orainstRoot.sh and root.sh scripts on both nodes as directed on the following screen.

Clusterware Post Install Scripts

The output from the orainstRoot.sh file should look something like that listed below.

# cd /u01/app/oraInventory
# ./orainstRoot.sh
Changing permissions of /u01/app/oraInventory to 770.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete
#

The output of the root.sh will vary a little depending on the node it is run on. The following text is the output from the RAC1 node.

# cd /u01/app/crs/product/11.1.0/crs
# ./root.sh
WARNING: directory '/u01/app/crs/product/11.1.0' is not owned by root
WARNING: directory '/u01/app/crs/product' is not owned by root
WARNING: directory '/u01/app/crs' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.

Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/u01/app/crs/product/11.1.0' is not owned by root. Changing owner to root
The directory '/u01/app/crs/product' is not owned by root. Changing owner to root
The directory '/u01/app/crs' is not owned by root. Changing owner to root
The directory '/u01/app' is not owned by root. Changing owner to root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /u01/shared_config/voting_disk
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes. 
        rac1
Cluster Synchronization Services is inactive on these nodes. 
        rac2
Local node checking complete. Run root.sh on remaining nodes to start CRS daemons.
#

The output from the RAC2 node is listed below.

# /u01/app/crs/product/11.1.0/crs
# ./root.sh
WARNING: directory '/u01/app/crs/product/11.1.0' is not owned by root
WARNING: directory '/u01/app/crs/product' is not owned by root
WARNING: directory '/u01/app/crs' is not owned by root
WARNING: directory '/u01/app' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.

Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
The directory '/u01/app/crs/product/11.1.0' is not owned by root. Changing owner to root
The directory '/u01/app/crs/product' is not owned by root. Changing owner to root
The directory '/u01/app/crs' is not owned by root. Changing owner to root
The directory '/u01/app' is not owned by root. Changing owner to root
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac1-priv rac1
node 2: rac2 rac2-priv rac2
clscfg: Arguments check out successfully.

NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes. 
        rac1
        rac2
Cluster Synchronization Services is active on all the nodes. 
Waiting for the Oracle CRSD and EVMD to start
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps

Creating VIP application resource on (2) nodes...
Creating GSD application resource on (2) nodes...
Creating ONS application resource on (2) nodes...
Starting VIP application resource on (2) nodes...
Starting GSD application resource on (2) nodes...
Starting ONS application resource on (2) nodes...


Done.
#

Here you can see that some of the configuration steps are omitted as they were done by the first node. In addition, the final part of the script ran the Virtual IP Configuration Assistant (VIPCA) in silent mode.

You should now return to the "Execute Configuration Scripts" screen on RAC1 and click the "OK" button.

Clusterware Post Install Scripts

Wait for the configuration assistants to complete.

Clusterware Config Assistants

When the installation is complete, click the "Exit" button to leave the installer.

Clusterware Complete

The clusterware installation is now complete.

Install the Database Software

Login to RAC1 as the oracle user and start the Oracle installer.

cd database
./runInstaller

On the "Welcome" screen, click the "Next" button.

Database Welcome

Select the "Enterprise Edition" option and click the "Next" button.

Database Installation Type

Enter the name and path for the Oracle Home and click the "Next" button.

Database Specify Home

Select the "Cluster Install" option and make sure both RAC nodes are selected, the click the "Next" button.

Database Cluster Installation

Wait while the prerequisite checks are done. If you have any failures correct them and retry the tests before clicking the "Next" button.

Database Prerequisites

Select the "Install Software only" option, then click the "Next" button.

Database Configuration Option

On the "Summary" screen, click the "Install" button to continue.

Database Summary

Wait while the database software installs.

Database Install

Execute the "root.sh" scripts on both nodes, as instructed on the "Execute Configuration scripts" screen, then click the "OK" button.

Database Post Install Scripts

When the installation is complete, click the "Exit" button to leave the installer.

Database Complete

Create a Database using the DBCA

Login to RAC1 as the oracle user and start the Database Configuration Assistant.

dbca

On the "Welcome" screen, select the "Oracle Real Application Clusters database" option and click the "Next" button.

DBCA Welcome

Select the "Create a Database" option and click the "Next" button.

DBCA Create Database

Highlight both RAC nodes and click the "Next" button.

DBCA Node Selection

Select the "Custom Database" option and click the "Next" button.

DBCA CustomDatabase

Enter the values "RAC.WORLD" and "RAC" for the Global Database Name and SID Prefix respectively, then click the "Next" button.

DBCA Database ID

Accept the management options by clicking the "Next" button. If you are attempting the installation on a server with limited memory, you may prefer not to configure Enterprise Manager at this time.

DBCA Management Options

Enter database passwords then click the "Next" button.

DBCA Database Credentials

Select the "Cluster File System" option, then click the "Next" button.

DBCA CFS

Select the "Use Oracle-Managed Files" option and enter "/u01/oradata/" as the database location, then click the "Next" button.

DBCA Database Location

Check the "Specify Flash Recovery Area" option and and enter "/u01/oradata/" as the location, then click the "Next" button. Note.I wouldn't normally expect to see the flash recovery area and datafiles in the same location, but this is only a test.

DBCA Recovery Config

Uncheck all but the "Enterprise Manager Repository" option, then click the "Standard Database Components..." button.

DBCA Database Content

Uncheck all but the "Oracle JVM" and "Oracle XML DB" options, then click the "OK" button, followed by the "Next" button on the previous screen. If you are attempting the installation on a server with limited memory, you may prefer not to install the JVM at this time.

DBCA Standard DB Components

Accept the "Typical" memory management option by clicking the "Next" button.

DBCA Parameters

Accept the 11g enhanced security settings by clicking the "Next" button.

Security Settings

Accept the automatic maintenance tasks by clicking the "Next" button.

Maintenance Tasks

Accept the database storage settings by clicking the "Next" button.

DBCA Storage

Accept the database creation options by clicking the "Finish" button.

DBCA Creation Options

Accept the summary information by clicking the "OK" button.

DBCA Summary

Wait while the database is created.

DBCA Creation

When prompted, click the "Yes" button to configure the listeners with the default settings.

Listener Configuration

Once the database creation is complete you are presented with the following screen. Make a note of the information on the screen and click the "Exit" button.

DBCA Complete

The RAC database creation is now complete.

TNS Configuration

Once the installation is complete, the "$ORACLE_HOME/network/admin/listener.ora" file in the shared $ORACLE_HOME will contain the following entries.

# listener.ora Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
# Generated by Oracle configuration tools.

LISTENER_RAC2 =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521)(IP = FIRST))
      )
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.102)(PORT = 1521)(IP = FIRST))
      )
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      )
    )
  )

LISTENER_RAC1 =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521)(IP = FIRST))
      )
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.2.101)(PORT = 1521)(IP = FIRST))
      )
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      )
    )
  )

The shared "$ORACLE_HOME/network/admin/tnsnames.ora" file will contain the following entries.

# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.1.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.

RAC =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521))
    (LOAD_BALANCE = yes)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = RAC.WORLD)
    )
  )

LISTENERS_RAC =
  (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521))
  )

RAC2 =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = rac2-vip)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = RAC.WORLD)
      (INSTANCE_NAME = RAC2)
    )
  )

RAC1 =
  (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = rac1-vip)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = RAC.WORLD)
      (INSTANCE_NAME = RAC1)
    )
  )

This configuration allows direct connections to specific instance, or using a load balanced connection to the main service.

$ sqlplus / as sysdba

SQL*Plus: Release 11.1.0.6.0 - Production on Tue Aug 14 19:16:47 2007

Copyright (c) 1982, 2007, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options

SQL> CONN sys/password@rac1 AS SYSDBA
Connected.
SQL> SELECT instance_name, host_name FROM v$instance;

INSTANCE_NAME     HOST_NAME
----------------  ----------------------------------------------------------------
RAC1              rac1.lynx.co.uk

SQL> CONN sys/password@rac2 AS SYSDBA
Connected.
SQL> SELECT instance_name, host_name FROM v$instance;

INSTANCE_NAME     HOST_NAME
----------------  ----------------------------------------------------------------
RAC2              rac2.lynx.co.uk

SQL> CONN sys/password@rac AS SYSDBA
Connected.
SQL> SELECT instance_name, host_name FROM v$instance;

INSTANCE_NAME     HOST_NAME
----------------  ----------------------------------------------------------------
RAC1              rac1.lynx.co.uk

SQL>

Check the Status of the RAC

There are several ways to check the status of the RAC. The srvctl utility shows the current configuration and status of the RAC database.

$ srvctl config database -d RAC
rac1 RAC1 /u01/app/oracle/product/11.1.0/db_1
rac2 RAC2 /u01/app/oracle/product/11.1.0/db_1
$

$ srvctl status database -d RAC
Instance RAC1 is running on node rac1
Instance RAC2 is running on node rac2
$

The V$ACTIVE_INSTANCES view can also display the current status of the instances.

$ sqlplus / as sysdba

SQL*Plus: Release 11.1.0.6.0 - Production on Tue Aug 14 19:21:37 2007

Copyright (c) 1982, 2007, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options

SQL> SELECT * FROM v$active_instances;

INST_NUMBER INST_NAME
----------- ------------------------------------------------------------
          1 rac1.lynx.co.uk:RAC1
          2 rac2.lynx.co.uk:RAC2

SQL>

Finally, the GV$ allow you to display global information for the whole RAC.

SQL> SELECT inst_id, username, sid, serial# FROM gv$session WHERE username IS NOT NULL;

   INST_ID USERNAME                              SID    SERIAL#
---------- ------------------------------ ---------- ----------
         2 SYS                                   116        841
         2 SYSMAN                                118         78
         2 SYS                                   119       1992
         2 SYSMAN                                121          1
         2 SYSMAN                                122         29
         2 SYS                                   123          2
         2 SYSMAN                                124         50
         2 DBSNMP                                129          1
         2 DBSNMP                                130          6
         2 DBSNMP                                134          1
         2 SYSMAN                                145         53

   INST_ID USERNAME                              SID    SERIAL#
---------- ------------------------------ ---------- ----------
         2 SYS                                   170         14
         1 SYSMAN                                117        144
         1 SYSMAN                                118        186
         1 SYSMAN                                119         31
         1 SYS                                   121          3
         1 SYSMAN                                122        162
         1 SYSMAN                                123         99
         1 DBSNMP                                124          3
         1 SYS                                   125          2
         1 SYS                                   126         19
         1 SYS                                   127        291

   INST_ID USERNAME                              SID    SERIAL#
---------- ------------------------------ ---------- ----------
         1 DBSNMP                                131         61
         1 SYS                                   170         17

24 rows selected.

SQL>

If you have configured Enterprise Manager, it can be used to view the configuration and current status of the database using a URL like "https://rac1.localdomain:1158/em".

Oracle Enterprise Manager

Direct NFS Client

For improved NFS performance, Oracle recommend using the Direct NFS Client shipped with Oracle 11g. The direct NFS client looks for NFS details in the following locations.

  1. $ORACLE_HOME/dbs/oranfstab
  2. /etc/oranfstab
  3. /etc/mtab

Since we already have our NFS mount point details in the "/etc/fstab", and therefore the "/etc/mtab" file also, there is no need to configure any extra connection details.

For the client to work we need to switch the "libodm11.so" library for the libnfsodm11.so library, as shown below.

srvctl stop database -d RAC

cd $ORACLE_HOME/lib
mv libodm11.so libodm11.so_stub
ln -s libnfsodm11.so libodm11.so

srvctl start database -d RAC

With the configuration complete, you can see the direct NFS client usage via the following views.

For example.

SQL> SELECT svrname, dirname FROM v$dnfs_servers;

SVRNAME        DIRNAME
-------------  -----------------
nas1           /shared_data

SQL>

The Direct NFS Client supports direct I/O and asynchronous I/O by default.

For more information see:

Hope this helps. Regards Tim...

Back to the Top.