Bringing machine 'default' up with 'virtualbox' provider... ==> default: Importing base box 'oraclebase/oracle-8.2'... Progress: 20% Progress: 40% Progress: 70% Progress: 90% ==> default: Matching MAC address for NAT networking... ==> default: Checking if box 'oraclebase/oracle-8.2' version '1.0.0' is up to date... ==> default: Setting the name of the VM: ol8_19_rac2 ==> default: Fixed port collision for 22 => 2222. Now on port 2200. ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat default: Adapter 2: intnet default: Adapter 3: intnet ==> default: Forwarding ports... default: 1521 (guest) => 1522 (host) (adapter 1) default: 5500 (guest) => 5502 (host) (adapter 1) default: 22 (guest) => 2200 (host) (adapter 1) ==> default: Running 'pre-boot' VM customizations... ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2200 default: SSH username: vagrant default: SSH auth method: private key default: default: Vagrant insecure key detected. Vagrant will automatically replace default: this with a newly generated keypair for better security. default: default: Inserting generated public key within guest... default: Removing insecure key from the guest if it's present... default: Key inserted! Disconnecting and reconnecting using new SSH key... ==> default: Machine booted and ready! ==> default: Checking for guest additions in VM... ==> default: Configuring and enabling network interfaces... ==> default: Mounting shared folders... default: /vagrant => C:/git/oraclebase/vagrant/rac/ol8_19/node2 default: /vagrant_config => C:/git/oraclebase/vagrant/rac/ol8_19/config default: /vagrant_scripts => C:/git/oraclebase/vagrant/rac/ol8_19/shared_scripts default: /vagrant_software => C:/git/oraclebase/vagrant/rac/ol8_19/software ==> default: Running provisioner: shell... default: Running: inline script default: ****************************************************************************** default: Setup Start. Sun 24 May 17:42:07 EDT 2020 default: ****************************************************************************** default: ****************************************************************************** default: Prepare /u01 disk. Sun 24 May 17:42:07 EDT 2020 default: ****************************************************************************** default: default: Welcome to fdisk (util-linux 2.32.1). default: Changes will remain in memory only, until you decide to write them. default: Be careful before using the write command. default: Device does not contain a recognized partition table. default: Created a new DOS disklabel with disk identifier 0x324912c6. default: default: Command (m for help): Partition type default: p primary (0 primary, 0 extended, 4 free) default: e extended (container for logical partitions) default: Select (default p): Partition number (1-4, default 1): First sector (2048-209715199, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-209715199, default 209715199): default: default: Created a new partition 1 of type 'Linux' and of size 100 GiB. default: default: Command (m for help): default: The partition table has been altered. default: Calling ioctl() to re-read partition table. default: Syncing disks. default: meta-data=/dev/sdb1 isize=512 agcount=4, agsize=6553536 blks default: = sectsz=512 attr=2, projid32bit=1 default: = crc=1 finobt=1, sparse=1, rmapbt=0 default: = reflink=1 default: data = bsize=4096 blocks=26214144, imaxpct=25 default: = sunit=0 swidth=0 blks default: naming =version 2 bsize=4096 ascii-ci=0, ftype=1 default: log =internal log bsize=4096 blocks=12799, version=2 default: = sectsz=512 sunit=0 blks, lazy-count=1 default: realtime =none extsz=4096 blocks=0, rtextents=0 default: ****************************************************************************** default: Prepare yum repos and install base packages. Sun 24 May 17:42:08 EDT 2020 default: ****************************************************************************** default: Last metadata expiration check: 1 day, 10:10:28 ago on Sat 23 May 2020 07:31:41 EDT. default: Package zip-3.0-23.el8.x86_64 is already installed. default: Package unzip-6.0-43.el8.x86_64 is already installed. default: Dependencies resolved. default: ================================================================================ default: Package Architecture Version Repository Size default: ================================================================================ default: Installing: default: yum-utils noarch 4.0.12-3.el8 ol8_baseos_latest 66 k default: default: Transaction Summary default: ================================================================================ default: Install 1 Package default: Total download size: 66 k default: Installed size: 20 k default: Downloading Packages: default: yum-utils-4.0.12-3.el8.noarch.rpm 493 kB/s | 66 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 481 kB/s | 66 kB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : yum-utils-4.0.12-3.el8.noarch 1/1 default: default: Running scriptlet: yum-utils-4.0.12-3.el8.noarch 1/1 default: default: Verifying : yum-utils-4.0.12-3.el8.noarch 1/1 default: default: default: Installed: default: yum-utils-4.0.12-3.el8.noarch default: Complete! default: Last metadata expiration check: 1 day, 10:10:32 ago on Sat 23 May 2020 07:31:41 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Arch Version Repository Size default: ================================================================================ default: Installing: default: oracle-epel-release-el8 x86_64 1.0-1.el8 ol8_baseos_latest 16 k default: default: Transaction Summary default: ================================================================================ default: Install 1 Package default: Total download size: 16 k default: Installed size: 18 k default: Downloading Packages: default: oracle-epel-release-el8-1.0-1.el8.x86_64.rpm 181 kB/s | 16 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 176 kB/s | 16 kB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : oracle-epel-release-el8-1.0-1.el8.x86_64 1/1 default: default: Running scriptlet: oracle-epel-release-el8-1.0-1.el8.x86_64 1/1 default: default: Verifying : oracle-epel-release-el8-1.0-1.el8.x86_64 1/1 default: default: default: Installed: default: oracle-epel-release-el8-1.0-1.el8.x86_64 default: Complete! default: Oracle Linux 8 EPEL Packages for Development (x 2.6 MB/s | 1.2 MB 00:00 default: Last metadata expiration check: 0:00:01 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Architecture Version Repository Size default: ================================================================================ default: Installing: default: sshpass x86_64 1.06-9.el8 ol8_developer_EPEL 28 k default: default: Transaction Summary default: ================================================================================ default: Install 1 Package default: Total download size: 28 k default: Installed size: 40 k default: Downloading Packages: default: sshpass-1.06-9.el8.x86_64.rpm 275 kB/s | 28 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 268 kB/s | 28 kB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : sshpass-1.06-9.el8.x86_64 1/1 default: default: Running scriptlet: sshpass-1.06-9.el8.x86_64 1/1 default: default: Verifying : sshpass-1.06-9.el8.x86_64 1/1 default: default: default: Installed: default: sshpass-1.06-9.el8.x86_64 default: Complete! default: Last metadata expiration check: 0:00:05 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================================== default: Package Arch Version Repository Size default: ================================================================================================== default: Installing: default: oracle-database-preinstall-19c x86_64 1.0-1.el8 ol8_baseos_latest 24 k default: Installing dependencies: default: bc x86_64 1.07.1-5.el8 ol8_baseos_latest 129 k default: bind-libs x86_64 32:9.11.13-3.el8 ol8_appstream 171 k default: bind-libs-lite x86_64 32:9.11.13-3.el8 ol8_appstream 1.2 M default: bind-license noarch 32:9.11.13-3.el8 ol8_appstream 100 k default: bind-utils x86_64 32:9.11.13-3.el8 ol8_appstream 443 k default: gssproxy x86_64 0.8.0-15.el8 ol8_baseos_latest 119 k default: keyutils x86_64 1.5.10-6.el8 ol8_baseos_latest 63 k default: ksh x86_64 20120801-254.0.1.el8 ol8_appstream 927 k default: libICE x86_64 1.0.9-15.el8 ol8_appstream 74 k default: libSM x86_64 1.2.3-1.el8 ol8_appstream 47 k default: libX11 x86_64 1.6.8-3.el8 ol8_appstream 611 k default: libX11-common noarch 1.6.8-3.el8 ol8_appstream 158 k default: libX11-xcb x86_64 1.6.8-3.el8 ol8_appstream 14 k default: libXau x86_64 1.0.8-13.el8 ol8_appstream 36 k default: libXcomposite x86_64 0.4.4-14.el8 ol8_appstream 28 k default: libXext x86_64 1.3.3-9.el8 ol8_appstream 45 k default: libXi x86_64 1.7.9-7.el8 ol8_appstream 49 k default: libXinerama x86_64 1.1.4-1.el8 ol8_appstream 15 k default: libXmu x86_64 1.1.2-12.el8 ol8_appstream 74 k default: libXrandr x86_64 1.5.1-7.el8 ol8_appstream 33 k default: libXrender x86_64 0.9.10-7.el8 ol8_appstream 33 k default: libXt x86_64 1.1.5-12.el8 ol8_appstream 185 k default: libXtst x86_64 1.2.3-7.el8 ol8_appstream 22 k default: libXv x86_64 1.0.11-7.el8 ol8_appstream 20 k default: libXxf86dga x86_64 1.1.4-12.el8 ol8_appstream 26 k default: libXxf86misc x86_64 1.0.4-1.el8 ol8_appstream 23 k default: libXxf86vm x86_64 1.1.4-9.el8 ol8_appstream 19 k default: libaio-devel x86_64 0.3.112-1.el8 ol8_baseos_latest 19 k default: libdmx x86_64 1.1.4-3.el8 ol8_appstream 22 k default: libnsl x86_64 2.28-101.0.1.el8 ol8_baseos_latest 97 k default: libstdc++-devel x86_64 8.3.1-5.0.3.el8 ol8_appstream 2.1 M default: libverto-libevent x86_64 0.3.0-5.el8 ol8_baseos_latest 16 k default: libxcb x86_64 1.13.1-1.el8 ol8_appstream 231 k default: lm_sensors-libs x86_64 3.4.0-21.20180522git70f7e08.el8 ol8_baseos_latest 59 k default: net-tools x86_64 2.0-0.51.20160912git.el8 ol8_baseos_latest 323 k default: nfs-utils x86_64 1:2.3.3-31.el8 ol8_baseos_latest 468 k default: psmisc x86_64 23.1-4.el8 ol8_baseos_latest 151 k default: python3-bind noarch 32:9.11.13-3.el8 ol8_appstream 147 k default: quota x86_64 1:4.04-10.el8 ol8_baseos_latest 214 k default: quota-nls noarch 1:4.04-10.el8 ol8_baseos_latest 94 k default: rpcbind x86_64 1.2.5-7.el8 ol8_baseos_latest 70 k default: smartmontools x86_64 1:6.6-3.el8 ol8_baseos_latest 502 k default: sysstat x86_64 11.7.3-2.el8 ol8_appstream 426 k default: xorg-x11-utils x86_64 7.5-28.el8 ol8_appstream 136 k default: xorg-x11-xauth x86_64 1:1.0.9-12.el8 ol8_appstream 39 k default: default: Transaction Summary default: ================================================================================================== default: Install 46 Packages default: Total download size: 9.6 M default: Installed size: 33 M default: Downloading Packages: default: (1/46): lm_sensors-libs-3.4.0-21.20180522git70f 490 kB/s | 59 kB 00:00 default: (2/46): keyutils-1.5.10-6.el8.x86_64.rpm 1.5 MB/s | 63 kB 00:00 default: (3/46): bc-1.07.1-5.el8.x86_64.rpm 2.0 MB/s | 129 kB 00:00 default: (4/46): smartmontools-6.6-3.el8.x86_64.rpm 2.2 MB/s | 502 kB 00:00 default: (5/46): net-tools-2.0-0.51.20160912git.el8.x86_ 1.4 MB/s | 323 kB 00:00 default: (6/46): rpcbind-1.2.5-7.el8.x86_64.rpm 1.9 MB/s | 70 kB 00:00 default: (7/46): libnsl-2.28-101.0.1.el8.x86_64.rpm 2.4 MB/s | 97 kB 00:00 default: (8/46): oracle-database-preinstall-19c-1.0-1.el 665 kB/s | 24 kB 00:00 default: (9/46): psmisc-23.1-4.el8.x86_64.rpm 4.4 MB/s | 151 kB 00:00 default: (10/46): libverto-libevent-0.3.0-5.el8.x86_64.r 485 kB/s | 16 kB 00:00 default: (11/46): quota-nls-4.04-10.el8.noarch.rpm 2.3 MB/s | 94 kB 00:00 default: (12/46): libaio-devel-0.3.112-1.el8.x86_64.rpm 536 kB/s | 19 kB 00:00 default: (13/46): quota-4.04-10.el8.x86_64.rpm 4.7 MB/s | 214 kB 00:00 default: (14/46): gssproxy-0.8.0-15.el8.x86_64.rpm 304 kB/s | 119 kB 00:00 default: (15/46): nfs-utils-2.3.3-31.el8.x86_64.rpm 1.2 MB/s | 468 kB 00:00 default: (16/46): python3-bind-9.11.13-3.el8.noarch.rpm 1.2 MB/s | 147 kB 00:00 default: (17/46): ksh-20120801-254.0.1.el8.x86_64.rpm 2.3 MB/s | 927 kB 00:00 default: (18/46): libX11-xcb-1.6.8-3.el8.x86_64.rpm 799 kB/s | 14 kB 00:00 default: (19/46): libXxf86misc-1.0.4-1.el8.x86_64.rpm 961 kB/s | 23 kB 00:00 default: (20/46): libXxf86dga-1.1.4-12.el8.x86_64.rpm 1.0 MB/s | 26 kB 00:00 default: (21/46): libXi-1.7.9-7.el8.x86_64.rpm 1.7 MB/s | 49 kB 00:00 default: (22/46): libXrandr-1.5.1-7.el8.x86_64.rpm 1.4 MB/s | 33 kB 00:00 default: (23/46): libXxf86vm-1.1.4-9.el8.x86_64.rpm 1.1 MB/s | 19 kB 00:00 default: (24/46): libdmx-1.1.4-3.el8.x86_64.rpm 990 kB/s | 22 kB 00:00 default: (25/46): bind-license-9.11.13-3.el8.noarch.rpm 210 kB/s | 100 kB 00:00 default: (26/46): libstdc++-devel-8.3.1-5.0.3.el8.x86_64 2.1 MB/s | 2.1 MB 00:00 default: (27/46): libXv-1.0.11-7.el8.x86_64.rpm 925 kB/s | 20 kB 00:00 default: (28/46): xorg-x11-utils-7.5-28.el8.x86_64.rpm 1.1 MB/s | 136 kB 00:00 default: (29/46): libXinerama-1.1.4-1.el8.x86_64.rpm 76 kB/s | 15 kB 00:00 default: (30/46): libxcb-1.13.1-1.el8.x86_64.rpm 1.0 MB/s | 231 kB 00:00 default: (31/46): xorg-x11-xauth-1.0.9-12.el8.x86_64.rpm 1.5 MB/s | 39 kB 00:00 default: (32/46): bind-libs-lite-9.11.13-3.el8.x86_64.rp 4.4 MB/s | 1.2 MB 00:00 default: (33/46): libSM-1.2.3-1.el8.x86_64.rpm 2.1 MB/s | 47 kB 00:00 default: (34/46): libXmu-1.1.2-12.el8.x86_64.rpm 766 kB/s | 74 kB 00:00 default: (35/46): libX11-common-1.6.8-3.el8.noarch.rpm 3.2 MB/s | 158 kB 00:00 default: (36/46): libXcomposite-0.4.4-14.el8.x86_64.rpm 264 kB/s | 28 kB 00:00 default: (37/46): bind-utils-9.11.13-3.el8.x86_64.rpm 5.5 MB/s | 443 kB 00:00 default: (38/46): libXtst-1.2.3-7.el8.x86_64.rpm 202 kB/s | 22 kB 00:00 default: (39/46): sysstat-11.7.3-2.el8.x86_64.rpm 6.1 MB/s | 426 kB 00:00 default: (40/46): libXau-1.0.8-13.el8.x86_64.rpm 277 kB/s | 36 kB 00:00 default: (41/46): libICE-1.0.9-15.el8.x86_64.rpm 2.7 MB/s | 74 kB 00:00 default: (42/46): libXt-1.1.5-12.el8.x86_64.rpm 1.8 MB/s | 185 kB 00:00 default: (43/46): libXext-1.3.3-9.el8.x86_64.rpm 1.1 MB/s | 45 kB 00:00 default: (44/46): libXrender-0.9.10-7.el8.x86_64.rpm 366 kB/s | 33 kB 00:00 default: (45/46): bind-libs-9.11.13-3.el8.x86_64.rpm 3.9 MB/s | 171 kB 00:00 default: (46/46): libX11-1.6.8-3.el8.x86_64.rpm 4.1 MB/s | 611 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 4.8 MB/s | 9.6 MB 00:01 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : bind-license-32:9.11.13-3.el8.noarch 1/46 default: default: Installing : bind-libs-lite-32:9.11.13-3.el8.x86_64 2/46 default: default: Installing : libICE-1.0.9-15.el8.x86_64 3/46 default: default: Installing : libXau-1.0.8-13.el8.x86_64 4/46 default: default: Installing : libxcb-1.13.1-1.el8.x86_64 5/46 default: default: Installing : libSM-1.2.3-1.el8.x86_64 6/46 default: default: Installing : bind-libs-32:9.11.13-3.el8.x86_64 7/46 default: default: Installing : python3-bind-32:9.11.13-3.el8.noarch 8/46 default: default: Installing : bind-utils-32:9.11.13-3.el8.x86_64 9/46 default: default: Installing : libX11-common-1.6.8-3.el8.noarch 10/46 default: default: Installing : libX11-1.6.8-3.el8.x86_64 11/46 default: default: Installing : libXext-1.3.3-9.el8.x86_64 12/46 default: default: Installing : libXi-1.7.9-7.el8.x86_64 13/46 default: default: Installing : libXrender-0.9.10-7.el8.x86_64 14/46 default: default: Installing : libXrandr-1.5.1-7.el8.x86_64 15/46 default: default: Installing : libXtst-1.2.3-7.el8.x86_64 16/46 default: default: Installing : libXxf86misc-1.0.4-1.el8.x86_64 17/46 default: default: Installing : libXxf86dga-1.1.4-12.el8.x86_64 18/46 default: default: Installing : libXxf86vm-1.1.4-9.el8.x86_64 19/46 default: default: Installing : libdmx-1.1.4-3.el8.x86_64 20/46 default: default: Installing : libXv-1.0.11-7.el8.x86_64 21/46 default: default: Installing : libXinerama-1.1.4-1.el8.x86_64 22/46 default: default: Installing : libXcomposite-0.4.4-14.el8.x86_64 23/46 default: default: Installing : libXt-1.1.5-12.el8.x86_64 24/46 default: default: Installing : libXmu-1.1.2-12.el8.x86_64 25/46 default: default: Installing : xorg-x11-xauth-1:1.0.9-12.el8.x86_64 26/46 default: default: Installing : libX11-xcb-1.6.8-3.el8.x86_64 27/46 default: default: Installing : xorg-x11-utils-7.5-28.el8.x86_64 28/46 default: default: Installing : ksh-20120801-254.0.1.el8.x86_64 29/46 default: default: Running scriptlet: ksh-20120801-254.0.1.el8.x86_64 29/46 default: default: Installing : libstdc++-devel-8.3.1-5.0.3.el8.x86_64 30/46 default: default: Installing : libaio-devel-0.3.112-1.el8.x86_64 31/46 default: default: Installing : quota-nls-1:4.04-10.el8.noarch 32/46 default: default: Installing : quota-1:4.04-10.el8.x86_64 33/46 default: default: Installing : libverto-libevent-0.3.0-5.el8.x86_64 34/46 default: default: Installing : gssproxy-0.8.0-15.el8.x86_64 35/46 default: default: Running scriptlet: gssproxy-0.8.0-15.el8.x86_64 35/46 default: default: Installing : psmisc-23.1-4.el8.x86_64 36/46 default: default: Running scriptlet: rpcbind-1.2.5-7.el8.x86_64 37/46 default: default: Installing : rpcbind-1.2.5-7.el8.x86_64 37/46 default: default: Running scriptlet: rpcbind-1.2.5-7.el8.x86_64 37/46 default: default: Installing : libnsl-2.28-101.0.1.el8.x86_64 38/46 default: default: Installing : bc-1.07.1-5.el8.x86_64 39/46 default: default: Running scriptlet: bc-1.07.1-5.el8.x86_64 39/46 default: default: Installing : keyutils-1.5.10-6.el8.x86_64 40/46 default: default: Running scriptlet: nfs-utils-1:2.3.3-31.el8.x86_64 41/46 default: default: Installing : nfs-utils-1:2.3.3-31.el8.x86_64 41/46 default: default: Running scriptlet: nfs-utils-1:2.3.3-31.el8.x86_64 41/46 default: default: Installing : lm_sensors-libs-3.4.0-21.20180522git70f7e08.el8.x8 42/46 default: default: Running scriptlet: lm_sensors-libs-3.4.0-21.20180522git70f7e08.el8.x8 42/46 default: default: Installing : sysstat-11.7.3-2.el8.x86_64 43/46 default: default: Running scriptlet: sysstat-11.7.3-2.el8.x86_64 43/46 default: default: Installing : net-tools-2.0-0.51.20160912git.el8.x86_64 44/46 default: default: Running scriptlet: net-tools-2.0-0.51.20160912git.el8.x86_64 44/46 default: default: Running scriptlet: smartmontools-1:6.6-3.el8.x86_64 45/46 default: default: Installing : smartmontools-1:6.6-3.el8.x86_64 45/46 default: default: Running scriptlet: smartmontools-1:6.6-3.el8.x86_64 45/46 default: default: Running scriptlet: oracle-database-preinstall-19c-1.0-1.el8.x86_64 46/46 default: default: Installing : oracle-database-preinstall-19c-1.0-1.el8.x86_64 46/46 default: default: Running scriptlet: oracle-database-preinstall-19c-1.0-1.el8.x86_64 46/46 default: default: Verifying : smartmontools-1:6.6-3.el8.x86_64 1/46 default: Verifying : net-tools-2.0-0.51.20160912git.el8.x86_64 2/46 default: Verifying : lm_sensors-libs-3.4.0-21.20180522git70f7e08.el8.x8 3/46 default: Verifying : keyutils-1.5.10-6.el8.x86_64 4/46 default: Verifying : bc-1.07.1-5.el8.x86_64 5/46 default: Verifying : libnsl-2.28-101.0.1.el8.x86_64 6/46 default: Verifying : rpcbind-1.2.5-7.el8.x86_64 7/46 default: Verifying : oracle-database-preinstall-19c-1.0-1.el8.x86_64 8/46 default: Verifying : psmisc-23.1-4.el8.x86_64 9/46 default: Verifying : libverto-libevent-0.3.0-5.el8.x86_64 10/46 default: Verifying : quota-nls-1:4.04-10.el8.noarch 11/46 default: Verifying : quota-1:4.04-10.el8.x86_64 12/46 default: Verifying : gssproxy-0.8.0-15.el8.x86_64 13/46 default: Verifying : libaio-devel-0.3.112-1.el8.x86_64 14/46 default: Verifying : nfs-utils-1:2.3.3-31.el8.x86_64 15/46 default: Verifying : libstdc++-devel-8.3.1-5.0.3.el8.x86_64 16/46 default: Verifying : ksh-20120801-254.0.1.el8.x86_64 17/46 default: Verifying : python3-bind-32:9.11.13-3.el8.noarch 18/46 default: Verifying : bind-license-32:9.11.13-3.el8.noarch 19/46 default: Verifying : libX11-xcb-1.6.8-3.el8.x86_64 20/46 default: Verifying : libXxf86misc-1.0.4-1.el8.x86_64 21/46 default: Verifying : libXxf86dga-1.1.4-12.el8.x86_64 22/46 default: Verifying : libXi-1.7.9-7.el8.x86_64 23/46 default: Verifying : libXrandr-1.5.1-7.el8.x86_64 24/46 default: Verifying : libXxf86vm-1.1.4-9.el8.x86_64 25/46 default: Verifying : libdmx-1.1.4-3.el8.x86_64 26/46 default: Verifying : xorg-x11-utils-7.5-28.el8.x86_64 27/46 default: Verifying : libXv-1.0.11-7.el8.x86_64 28/46 default: Verifying : bind-libs-lite-32:9.11.13-3.el8.x86_64 29/46 default: Verifying : libxcb-1.13.1-1.el8.x86_64 30/46 default: Verifying : libXinerama-1.1.4-1.el8.x86_64 31/46 default: Verifying : libXmu-1.1.2-12.el8.x86_64 32/46 default: Verifying : xorg-x11-xauth-1:1.0.9-12.el8.x86_64 33/46 default: Verifying : libSM-1.2.3-1.el8.x86_64 34/46 default: Verifying : libXcomposite-0.4.4-14.el8.x86_64 35/46 default: Verifying : libX11-common-1.6.8-3.el8.noarch 36/46 default: Verifying : bind-utils-32:9.11.13-3.el8.x86_64 37/46 default: Verifying : libXtst-1.2.3-7.el8.x86_64 38/46 default: Verifying : libXau-1.0.8-13.el8.x86_64 39/46 default: Verifying : sysstat-11.7.3-2.el8.x86_64 40/46 default: Verifying : libXt-1.1.5-12.el8.x86_64 41/46 default: Verifying : libICE-1.0.9-15.el8.x86_64 42/46 default: Verifying : libXrender-0.9.10-7.el8.x86_64 43/46 default: Verifying : libX11-1.6.8-3.el8.x86_64 44/46 default: Verifying : libXext-1.3.3-9.el8.x86_64 45/46 default: Verifying : bind-libs-32:9.11.13-3.el8.x86_64 46/46 default: default: default: Installed: default: bc-1.07.1-5.el8.x86_64 default: bind-libs-32:9.11.13-3.el8.x86_64 default: bind-libs-lite-32:9.11.13-3.el8.x86_64 default: bind-license-32:9.11.13-3.el8.noarch default: bind-utils-32:9.11.13-3.el8.x86_64 default: gssproxy-0.8.0-15.el8.x86_64 default: keyutils-1.5.10-6.el8.x86_64 default: ksh-20120801-254.0.1.el8.x86_64 default: libICE-1.0.9-15.el8.x86_64 default: libSM-1.2.3-1.el8.x86_64 default: libX11-1.6.8-3.el8.x86_64 default: libX11-common-1.6.8-3.el8.noarch default: libX11-xcb-1.6.8-3.el8.x86_64 default: libXau-1.0.8-13.el8.x86_64 default: libXcomposite-0.4.4-14.el8.x86_64 default: libXext-1.3.3-9.el8.x86_64 default: libXi-1.7.9-7.el8.x86_64 default: libXinerama-1.1.4-1.el8.x86_64 default: libXmu-1.1.2-12.el8.x86_64 default: libXrandr-1.5.1-7.el8.x86_64 default: libXrender-0.9.10-7.el8.x86_64 default: libXt-1.1.5-12.el8.x86_64 default: libXtst-1.2.3-7.el8.x86_64 default: libXv-1.0.11-7.el8.x86_64 default: libXxf86dga-1.1.4-12.el8.x86_64 default: libXxf86misc-1.0.4-1.el8.x86_64 default: libXxf86vm-1.1.4-9.el8.x86_64 default: libaio-devel-0.3.112-1.el8.x86_64 default: libdmx-1.1.4-3.el8.x86_64 default: libnsl-2.28-101.0.1.el8.x86_64 default: libstdc++-devel-8.3.1-5.0.3.el8.x86_64 default: libverto-libevent-0.3.0-5.el8.x86_64 default: libxcb-1.13.1-1.el8.x86_64 default: lm_sensors-libs-3.4.0-21.20180522git70f7e08.el8.x86_64 default: net-tools-2.0-0.51.20160912git.el8.x86_64 default: nfs-utils-1:2.3.3-31.el8.x86_64 default: oracle-database-preinstall-19c-1.0-1.el8.x86_64 default: psmisc-23.1-4.el8.x86_64 default: python3-bind-32:9.11.13-3.el8.noarch default: quota-1:4.04-10.el8.x86_64 default: quota-nls-1:4.04-10.el8.noarch default: rpcbind-1.2.5-7.el8.x86_64 default: smartmontools-1:6.6-3.el8.x86_64 default: sysstat-11.7.3-2.el8.x86_64 default: xorg-x11-utils-7.5-28.el8.x86_64 default: xorg-x11-xauth-1:1.0.9-12.el8.x86_64 default: Complete! default: ****************************************************************************** default: Add extra OS packages. Most should be present. Sun 24 May 17:42:45 EDT 2020 default: ****************************************************************************** default: Last metadata expiration check: 0:00:29 ago on Sun 24 May 2020 17:42:16 EDT. default: Package bc-1.07.1-5.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:31 ago on Sun 24 May 2020 17:42:16 EDT. default: Package binutils-2.30-73.0.1.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:34 ago on Sun 24 May 2020 17:42:16 EDT. default: No match for argument: compat-libstdc++-33 default: Error: Unable to find a match: compat-libstdc++-33 default: Last metadata expiration check: 0:00:35 ago on Sun 24 May 2020 17:42:16 EDT. default: Package elfutils-libelf-0.178-7.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:38 ago on Sun 24 May 2020 17:42:16 EDT. default: Package elfutils-libelf-devel-0.178-7.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:40 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Arch Version Repository Size default: ================================================================================ default: Installing: default: fontconfig-devel x86_64 2.13.1-3.el8 ol8_baseos_latest 151 k default: Installing dependencies: default: aajohan-comfortaa-fonts noarch 3.001-2.el8 ol8_baseos_latest 148 k default: bzip2-devel x86_64 1.0.6-26.el8 ol8_baseos_latest 224 k default: expat-devel x86_64 2.2.5-3.el8 ol8_baseos_latest 55 k default: fontconfig x86_64 2.13.1-3.el8 ol8_baseos_latest 274 k default: fontpackages-filesystem noarch 1.44-22.el8 ol8_baseos_latest 16 k default: freetype-devel x86_64 2.9.1-4.el8 ol8_baseos_latest 464 k default: libpng-devel x86_64 2:1.6.34-5.el8 ol8_baseos_latest 327 k default: libuuid-devel x86_64 2.32.1-22.el8 ol8_baseos_latest 95 k default: default: Transaction Summary default: ================================================================================ default: Install 9 Packages default: Total download size: 1.7 M default: Installed size: 5.5 M default: Downloading Packages: default: (1/9): libuuid-devel-2.32.1-22.el8.x86_64.rpm 686 kB/s | 95 kB 00:00 default: (2/9): expat-devel-2.2.5-3.el8.x86_64.rpm 376 kB/s | 55 kB 00:00 default: (3/9): aajohan-comfortaa-fonts-3.001-2.el8.noar 1.7 MB/s | 148 kB 00:00 default: (4/9): libpng-devel-1.6.34-5.el8.x86_64.rpm 1.2 MB/s | 327 kB 00:00 default: (5/9): freetype-devel-2.9.1-4.el8.x86_64.rpm 3.6 MB/s | 464 kB 00:00 default: (6/9): fontpackages-filesystem-1.44-22.el8.noar 649 kB/s | 16 kB 00:00 default: (7/9): fontconfig-devel-2.13.1-3.el8.x86_64.rpm 3.1 MB/s | 151 kB 00:00 default: (8/9): bzip2-devel-1.0.6-26.el8.x86_64.rpm 2.8 MB/s | 224 kB 00:00 default: (9/9): fontconfig-2.13.1-3.el8.x86_64.rpm 4.4 MB/s | 274 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 4.9 MB/s | 1.7 MB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : fontpackages-filesystem-1.44-22.el8.noarch 1/9 default: default: Installing : aajohan-comfortaa-fonts-3.001-2.el8.noarch 2/9 default: default: Installing : fontconfig-2.13.1-3.el8.x86_64 3/9 default: default: Running scriptlet: fontconfig-2.13.1-3.el8.x86_64 3/9 default: default: Installing : bzip2-devel-1.0.6-26.el8.x86_64 4/9 default: default: Installing : expat-devel-2.2.5-3.el8.x86_64 5/9 default: default: Installing : libuuid-devel-2.32.1-22.el8.x86_64 6/9 default: default: Installing : libpng-devel-2:1.6.34-5.el8.x86_64 7/9 default: default: Installing : freetype-devel-2.9.1-4.el8.x86_64 8/9 default: default: Installing : fontconfig-devel-2.13.1-3.el8.x86_64 9/9 default: default: Running scriptlet: fontconfig-devel-2.13.1-3.el8.x86_64 9/9 default: default: Running scriptlet: fontconfig-2.13.1-3.el8.x86_64 9/9 default: default: Verifying : libpng-devel-2:1.6.34-5.el8.x86_64 1/9 default: default: Verifying : libuuid-devel-2.32.1-22.el8.x86_64 2/9 default: default: Verifying : expat-devel-2.2.5-3.el8.x86_64 3/9 default: default: Verifying : freetype-devel-2.9.1-4.el8.x86_64 4/9 default: default: Verifying : aajohan-comfortaa-fonts-3.001-2.el8.noarch 5/9 default: default: Verifying : bzip2-devel-1.0.6-26.el8.x86_64 6/9 default: default: Verifying : fontpackages-filesystem-1.44-22.el8.noarch 7/9 default: default: Verifying : fontconfig-devel-2.13.1-3.el8.x86_64 8/9 default: default: Verifying : fontconfig-2.13.1-3.el8.x86_64 9/9 default: default: default: Installed: default: aajohan-comfortaa-fonts-3.001-2.el8.noarch default: bzip2-devel-1.0.6-26.el8.x86_64 default: expat-devel-2.2.5-3.el8.x86_64 default: fontconfig-2.13.1-3.el8.x86_64 default: fontconfig-devel-2.13.1-3.el8.x86_64 default: fontpackages-filesystem-1.44-22.el8.noarch default: freetype-devel-2.9.1-4.el8.x86_64 default: libpng-devel-2:1.6.34-5.el8.x86_64 default: libuuid-devel-2.32.1-22.el8.x86_64 default: Complete! default: Last metadata expiration check: 0:00:45 ago on Sun 24 May 2020 17:42:16 EDT. default: Package glibc-2.28-101.0.1.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:47 ago on Sun 24 May 2020 17:42:16 EDT. default: Package glibc-devel-2.28-101.0.1.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:49 ago on Sun 24 May 2020 17:42:16 EDT. default: Package ksh-20120801-254.0.1.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:52 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libaio-0.3.112-1.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:54 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libaio-devel-0.3.112-1.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:56 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libXrender-0.9.10-7.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:00:59 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Arch Version Repository Size default: ================================================================================ default: Installing: default: libXrender-devel x86_64 0.9.10-7.el8 ol8_appstream 22 k default: Installing dependencies: default: libX11-devel x86_64 1.6.8-3.el8 ol8_appstream 976 k default: libXau-devel x86_64 1.0.8-13.el8 ol8_appstream 20 k default: libxcb-devel x86_64 1.13.1-1.el8 ol8_appstream 1.1 M default: xorg-x11-proto-devel noarch 2018.4-1.el8 ol8_appstream 283 k default: default: Transaction Summary default: ================================================================================ default: Install 5 Packages default: Total download size: 2.3 M default: Installed size: 5.4 M default: Downloading Packages: default: (1/5): libXrender-devel-0.9.10-7.el8.x86_64.rpm 161 kB/s | 22 kB 00:00 default: (2/5): xorg-x11-proto-devel-2018.4-1.el8.noarch 1.7 MB/s | 283 kB 00:00 default: (3/5): libXau-devel-1.0.8-13.el8.x86_64.rpm 800 kB/s | 20 kB 00:00 default: (4/5): libxcb-devel-1.13.1-1.el8.x86_64.rpm 3.2 MB/s | 1.1 MB 00:00 default: (5/5): libX11-devel-1.6.8-3.el8.x86_64.rpm 1.5 MB/s | 976 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 2.9 MB/s | 2.3 MB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : xorg-x11-proto-devel-2018.4-1.el8.noarch 1/5 default: default: Installing : libXau-devel-1.0.8-13.el8.x86_64 2/5 default: default: Installing : libxcb-devel-1.13.1-1.el8.x86_64 3/5 default: default: Installing : libX11-devel-1.6.8-3.el8.x86_64 4/5 default: default: Installing : libXrender-devel-0.9.10-7.el8.x86_64 5/5 default: default: Running scriptlet: libXrender-devel-0.9.10-7.el8.x86_64 5/5 default: default: Verifying : xorg-x11-proto-devel-2018.4-1.el8.noarch 1/5 default: default: Verifying : libxcb-devel-1.13.1-1.el8.x86_64 2/5 default: default: Verifying : libXrender-devel-0.9.10-7.el8.x86_64 3/5 default: Verifying : libXau-devel-1.0.8-13.el8.x86_64 4/5 default: default: Verifying : libX11-devel-1.6.8-3.el8.x86_64 5/5 default: default: default: Installed: default: libX11-devel-1.6.8-3.el8.x86_64 libXau-devel-1.0.8-13.el8.x86_64 default: libXrender-devel-0.9.10-7.el8.x86_64 libxcb-devel-1.13.1-1.el8.x86_64 default: xorg-x11-proto-devel-2018.4-1.el8.noarch default: Complete! default: Last metadata expiration check: 0:01:05 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libX11-1.6.8-3.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:08 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libXau-1.0.8-13.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:10 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libXi-1.7.9-7.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:12 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libXtst-1.2.3-7.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:15 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libgcc-8.3.1-5.0.3.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:17 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Arch Version Repository Size default: ================================================================================ default: Installing: default: rdma-core-devel x86_64 26.0-8.el8 ol8_baseos_latest 303 k default: Installing dependencies: default: ibacm x86_64 26.0-8.el8 ol8_baseos_latest 92 k default: infiniband-diags x86_64 26.0-8.el8 ol8_baseos_latest 320 k default: libibumad x86_64 26.0-8.el8 ol8_baseos_latest 32 k default: libibverbs x86_64 26.0-8.el8 ol8_baseos_latest 288 k default: librdmacm x86_64 26.0-8.el8 ol8_baseos_latest 75 k default: pciutils x86_64 3.5.6-4.el8 ol8_baseos_latest 105 k default: rdma-core x86_64 26.0-8.el8 ol8_baseos_latest 62 k default: default: Transaction Summary default: ================================================================================ default: Install 8 Packages default: Total download size: 1.2 M default: Installed size: 2.9 M default: Downloading Packages: default: (1/8): libibumad-26.0-8.el8.x86_64.rpm 291 kB/s | 32 kB 00:00 default: (2/8): librdmacm-26.0-8.el8.x86_64.rpm 524 kB/s | 75 kB 00:00 default: (3/8): rdma-core-devel-26.0-8.el8.x86_64.rpm 1.8 MB/s | 303 kB 00:00 default: (4/8): rdma-core-26.0-8.el8.x86_64.rpm 1.6 MB/s | 62 kB 00:00 default: (5/8): infiniband-diags-26.0-8.el8.x86_64.rpm 4.0 MB/s | 320 kB 00:00 default: (6/8): ibacm-26.0-8.el8.x86_64.rpm 3.1 MB/s | 92 kB 00:00 default: (7/8): pciutils-3.5.6-4.el8.x86_64.rpm 2.9 MB/s | 105 kB 00:00 default: (8/8): libibverbs-26.0-8.el8.x86_64.rpm 4.8 MB/s | 288 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 5.1 MB/s | 1.2 MB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : pciutils-3.5.6-4.el8.x86_64 1/8 default: default: Installing : rdma-core-26.0-8.el8.x86_64 2/8 default: default: Installing : libibumad-26.0-8.el8.x86_64 3/8 default: default: Running scriptlet: libibumad-26.0-8.el8.x86_64 3/8 default: default: Installing : libibverbs-26.0-8.el8.x86_64 4/8 default: default: Running scriptlet: libibverbs-26.0-8.el8.x86_64 4/8 default: default: Installing : librdmacm-26.0-8.el8.x86_64 5/8 default: default: Running scriptlet: librdmacm-26.0-8.el8.x86_64 5/8 default: default: Installing : ibacm-26.0-8.el8.x86_64 6/8 default: default: Running scriptlet: ibacm-26.0-8.el8.x86_64 6/8 default: default: Installing : infiniband-diags-26.0-8.el8.x86_64 7/8 default: default: Running scriptlet: infiniband-diags-26.0-8.el8.x86_64 7/8 default: default: Installing : rdma-core-devel-26.0-8.el8.x86_64 8/8 default: default: Running scriptlet: rdma-core-devel-26.0-8.el8.x86_64 8/8 default: default: Verifying : librdmacm-26.0-8.el8.x86_64 1/8 default: default: Verifying : libibumad-26.0-8.el8.x86_64 2/8 default: Verifying : rdma-core-devel-26.0-8.el8.x86_64 3/8 default: Verifying : infiniband-diags-26.0-8.el8.x86_64 4/8 default: default: Verifying : rdma-core-26.0-8.el8.x86_64 5/8 default: Verifying : ibacm-26.0-8.el8.x86_64 6/8 default: Verifying : libibverbs-26.0-8.el8.x86_64 7/8 default: default: Verifying : pciutils-3.5.6-4.el8.x86_64 8/8 default: default: default: Installed: default: ibacm-26.0-8.el8.x86_64 infiniband-diags-26.0-8.el8.x86_64 default: libibumad-26.0-8.el8.x86_64 libibverbs-26.0-8.el8.x86_64 default: librdmacm-26.0-8.el8.x86_64 pciutils-3.5.6-4.el8.x86_64 default: rdma-core-26.0-8.el8.x86_64 rdma-core-devel-26.0-8.el8.x86_64 default: default: Complete! default: Last metadata expiration check: 0:01:21 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libstdc++-8.3.1-5.0.3.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:24 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libstdc++-devel-8.3.1-5.0.3.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:26 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libxcb-1.13.1-1.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:28 ago on Sun 24 May 2020 17:42:16 EDT. default: Package make-1:4.2.1-10.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:30 ago on Sun 24 May 2020 17:42:16 EDT. default: Package net-tools-2.0-0.51.20160912git.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:32 ago on Sun 24 May 2020 17:42:16 EDT. default: Package nfs-utils-1:2.3.3-31.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:35 ago on Sun 24 May 2020 17:42:16 EDT. default: No match for argument: python default: There are following alternatives for "python": python2, python36, python38 default: Error: Unable to find a match: python default: Last metadata expiration check: 0:01:36 ago on Sun 24 May 2020 17:42:16 EDT. default: No match for argument: python-configshell default: Error: Unable to find a match: python-configshell default: Last metadata expiration check: 0:01:38 ago on Sun 24 May 2020 17:42:16 EDT. default: No match for argument: python-rtslib default: Error: Unable to find a match: python-rtslib default: Last metadata expiration check: 0:01:40 ago on Sun 24 May 2020 17:42:16 EDT. default: No match for argument: python-six default: Error: Unable to find a match: python-six default: Last metadata expiration check: 0:01:41 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Arch Version Repository Size default: ================================================================================ default: Installing: default: targetcli noarch 2.1.51-4.el8_2 ol8_appstream 79 k default: Installing dependencies: default: python3-rtslib noarch 2.1.71-4.0.1.el8 ol8_baseos_latest 102 k default: target-restore noarch 2.1.71-4.0.1.el8 ol8_baseos_latest 24 k default: default: Transaction Summary default: ================================================================================ default: Install 3 Packages default: Total download size: 205 k default: Installed size: 912 k default: Downloading Packages: default: (1/3): target-restore-2.1.71-4.0.1.el8.noarch.r 201 kB/s | 24 kB 00:00 default: (2/3): targetcli-2.1.51-4.el8_2.noarch.rpm 619 kB/s | 79 kB 00:00 default: (3/3): python3-rtslib-2.1.71-4.0.1.el8.noarch.r 663 kB/s | 102 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 1.2 MB/s | 205 kB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : python3-rtslib-2.1.71-4.0.1.el8.noarch 1/3 default: default: Installing : target-restore-2.1.71-4.0.1.el8.noarch 2/3 default: default: Running scriptlet: target-restore-2.1.71-4.0.1.el8.noarch 2/3 default: default: Installing : targetcli-2.1.51-4.el8_2.noarch 3/3 default: default: Running scriptlet: targetcli-2.1.51-4.el8_2.noarch 3/3 default: default: Verifying : target-restore-2.1.71-4.0.1.el8.noarch 1/3 default: default: Verifying : python3-rtslib-2.1.71-4.0.1.el8.noarch 2/3 default: default: Verifying : targetcli-2.1.51-4.el8_2.noarch 3/3 default: default: default: Installed: default: python3-rtslib-2.1.71-4.0.1.el8.noarch target-restore-2.1.71-4.0.1.el8.noarch default: targetcli-2.1.51-4.el8_2.noarch default: Complete! default: Last metadata expiration check: 0:01:46 ago on Sun 24 May 2020 17:42:16 EDT. default: Package smartmontools-1:6.6-3.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:48 ago on Sun 24 May 2020 17:42:16 EDT. default: Package sysstat-11.7.3-2.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:50 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Arch Version Repository Size default: ================================================================================ default: Installing: default: unixODBC x86_64 2.3.7-1.el8 ol8_appstream 458 k default: Installing dependencies: default: libtool-ltdl x86_64 2.4.6-25.el8 ol8_baseos_latest 58 k default: default: Transaction Summary default: ================================================================================ default: Install 2 Packages default: Total download size: 516 k default: Installed size: 1.6 M default: Downloading Packages: default: (1/2): libtool-ltdl-2.4.6-25.el8.x86_64.rpm 335 kB/s | 58 kB 00:00 default: (2/2): unixODBC-2.3.7-1.el8.x86_64.rpm 2.2 MB/s | 458 kB 00:00 default: -------------------------------------------------------------------------------- default: Total 2.4 MB/s | 516 kB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : libtool-ltdl-2.4.6-25.el8.x86_64 1/2 default: default: Running scriptlet: libtool-ltdl-2.4.6-25.el8.x86_64 1/2 default: default: Installing : unixODBC-2.3.7-1.el8.x86_64 2/2 default: default: Running scriptlet: unixODBC-2.3.7-1.el8.x86_64 2/2 default: default: Verifying : libtool-ltdl-2.4.6-25.el8.x86_64 1/2 default: Verifying : unixODBC-2.3.7-1.el8.x86_64 2/2 default: default: default: Installed: default: libtool-ltdl-2.4.6-25.el8.x86_64 unixODBC-2.3.7-1.el8.x86_64 default: Complete! default: Last metadata expiration check: 0:01:53 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libnsl-2.28-101.0.1.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:01:56 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Arch Version Repository Size default: ================================================================================ default: Installing: default: libnsl i686 2.28-101.0.1.el8 ol8_baseos_latest 101 k default: Installing dependencies: default: glibc i686 2.28-101.0.1.el8 ol8_baseos_latest 3.4 M default: default: Transaction Summary default: ================================================================================ default: Install 2 Packages default: Total download size: 3.5 M default: Installed size: 13 M default: Downloading Packages: default: (1/2): libnsl-2.28-101.0.1.el8.i686.rpm 732 kB/s | 101 kB 00:00 default: (2/2): glibc-2.28-101.0.1.el8.i686.rpm 5.4 MB/s | 3.4 MB 00:00 default: -------------------------------------------------------------------------------- default: Total 5.5 MB/s | 3.5 MB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Running scriptlet: glibc-2.28-101.0.1.el8.i686 1/2 default: default: Installing : glibc-2.28-101.0.1.el8.i686 1/2 default: default: Running scriptlet: glibc-2.28-101.0.1.el8.i686 1/2 default: default: Installing : libnsl-2.28-101.0.1.el8.i686 2/2 default: default: Running scriptlet: libnsl-2.28-101.0.1.el8.i686 2/2 default: default: Verifying : libnsl-2.28-101.0.1.el8.i686 1/2 default: default: Verifying : glibc-2.28-101.0.1.el8.i686 2/2 default: default: default: Installed: default: glibc-2.28-101.0.1.el8.i686 libnsl-2.28-101.0.1.el8.i686 default: Complete! default: Last metadata expiration check: 0:02:00 ago on Sun 24 May 2020 17:42:16 EDT. default: Package libnsl2-1.2.0-2.20180605git4a062cf.el8.x86_64 is already installed. default: Dependencies resolved. default: Nothing to do. default: Complete! default: Last metadata expiration check: 0:02:02 ago on Sun 24 May 2020 17:42:16 EDT. default: Dependencies resolved. default: ================================================================================ default: Package Arch Version Repository Size default: ================================================================================ default: Installing: default: libnsl2 i686 1.2.0-2.20180605git4a062cf.el8 ol8_baseos_latest 61 k default: Installing dependencies: default: keyutils-libs i686 1.5.10-6.el8 ol8_baseos_latest 34 k default: krb5-libs i686 1.17-18.el8 ol8_baseos_latest 912 k default: libcom_err i686 1.45.4-3.el8 ol8_baseos_latest 49 k default: libselinux i686 2.9-3.el8 ol8_baseos_latest 173 k default: libsepol i686 2.9-1.el8 ol8_baseos_latest 367 k default: libtirpc i686 1.1.4-4.el8 ol8_baseos_latest 121 k default: libverto i686 0.3.0-5.el8 ol8_baseos_latest 25 k default: openssl-libs i686 1:1.1.1c-15.el8 ol8_baseos_latest 1.5 M default: pcre2 i686 10.32-1.el8 ol8_baseos_latest 246 k default: zlib i686 1.2.11-13.el8 ol8_baseos_latest 104 k default: default: Transaction Summary default: ================================================================================ default: Install 11 Packages default: Total download size: 3.5 M default: Installed size: 8.4 M default: Downloading Packages: default: (1/11): libselinux-2.9-3.el8.i686.rpm 1.0 MB/s | 173 kB 00:00 default: (2/11): libcom_err-1.45.4-3.el8.i686.rpm 1.1 MB/s | 49 kB 00:00 default: (3/11): krb5-libs-1.17-18.el8.i686.rpm 3.2 MB/s | 912 kB 00:00 default: (4/11): pcre2-10.32-1.el8.i686.rpm 3.0 MB/s | 246 kB 00:00 default: (5/11): libnsl2-1.2.0-2.20180605git4a062cf.el8. 2.1 MB/s | 61 kB 00:00 default: (6/11): libverto-0.3.0-5.el8.i686.rpm 1.2 MB/s | 25 kB 00:00 default: (7/11): keyutils-libs-1.5.10-6.el8.i686.rpm 888 kB/s | 34 kB 00:00 default: (8/11): zlib-1.2.11-13.el8.i686.rpm 2.6 MB/s | 104 kB 00:00 default: (9/11): libtirpc-1.1.4-4.el8.i686.rpm 3.1 MB/s | 121 kB 00:00 default: (10/11): libsepol-2.9-1.el8.i686.rpm 4.9 MB/s | 367 kB 00:00 default: (11/11): openssl-libs-1.1.1c-15.el8.i686.rpm 2.9 MB/s | 1.5 MB 00:00 default: -------------------------------------------------------------------------------- default: Total 6.8 MB/s | 3.5 MB 00:00 default: Running transaction check default: Transaction check succeeded. default: Running transaction test default: Transaction test succeeded. default: Running transaction default: Preparing : 1/1 default: default: Installing : libcom_err-1.45.4-3.el8.i686 1/11 default: default: Running scriptlet: libcom_err-1.45.4-3.el8.i686 1/11 default: default: Installing : libsepol-2.9-1.el8.i686 2/11 default: default: Running scriptlet: libsepol-2.9-1.el8.i686 2/11 default: default: Installing : zlib-1.2.11-13.el8.i686 3/11 default: default: Installing : openssl-libs-1:1.1.1c-15.el8.i686 4/11 default: default: Running scriptlet: openssl-libs-1:1.1.1c-15.el8.i686 4/11 default: default: Installing : keyutils-libs-1.5.10-6.el8.i686 5/11 default: default: Installing : libverto-0.3.0-5.el8.i686 6/11 default: default: Installing : pcre2-10.32-1.el8.i686 7/11 default: default: Installing : libselinux-2.9-3.el8.i686 8/11 default: default: Running scriptlet: libselinux-2.9-3.el8.i686 8/11 default: default: Installing : krb5-libs-1.17-18.el8.i686 9/11 default: default: Installing : libtirpc-1.1.4-4.el8.i686 10/11 default: default: Running scriptlet: libtirpc-1.1.4-4.el8.i686 10/11 default: default: Installing : libnsl2-1.2.0-2.20180605git4a062cf.el8.i686 11/11 default: default: Running scriptlet: libnsl2-1.2.0-2.20180605git4a062cf.el8.i686 11/11 default: default: Verifying : krb5-libs-1.17-18.el8.i686 1/11 default: default: Verifying : openssl-libs-1:1.1.1c-15.el8.i686 2/11 default: Verifying : libselinux-2.9-3.el8.i686 3/11 default: default: Verifying : libcom_err-1.45.4-3.el8.i686 4/11 default: default: Verifying : pcre2-10.32-1.el8.i686 5/11 default: default: Verifying : libnsl2-1.2.0-2.20180605git4a062cf.el8.i686 6/11 default: default: Verifying : libverto-0.3.0-5.el8.i686 7/11 default: default: Verifying : keyutils-libs-1.5.10-6.el8.i686 8/11 default: default: Verifying : zlib-1.2.11-13.el8.i686 9/11 default: default: Verifying : libtirpc-1.1.4-4.el8.i686 10/11 default: default: Verifying : libsepol-2.9-1.el8.i686 11/11 default: default: default: Installed: default: keyutils-libs-1.5.10-6.el8.i686 krb5-libs-1.17-18.el8.i686 default: libcom_err-1.45.4-3.el8.i686 libnsl2-1.2.0-2.20180605git4a062cf.el8.i686 default: libselinux-2.9-3.el8.i686 libsepol-2.9-1.el8.i686 default: libtirpc-1.1.4-4.el8.i686 libverto-0.3.0-5.el8.i686 default: openssl-libs-1:1.1.1c-15.el8.i686 pcre2-10.32-1.el8.i686 default: zlib-1.2.11-13.el8.i686 default: Complete! default: ****************************************************************************** default: Firewall. Sun 24 May 17:44:22 EDT 2020 default: ****************************************************************************** default: Removed /etc/systemd/system/multi-user.target.wants/firewalld.service. default: Removed /etc/systemd/system/dbus-org.fedoraproject.FirewallD1.service. default: ****************************************************************************** default: SELinux. Sun 24 May 17:44:23 EDT 2020 default: ****************************************************************************** default: ****************************************************************************** default: Set root and oracle password and change ownership of /u01. Sun 24 May 17:44:23 EDT 2020 default: ****************************************************************************** default: New password: default: Retype new password: default: Changing password for user root. default: passwd: all authentication tokens updated successfully. default: New password: default: Retype new password: default: Changing password for user oracle. default: passwd: all authentication tokens updated successfully. default: ****************************************************************************** default: Amend hosts file with public, private and virtual IPs. Sun 24 May 17:44:23 EDT 2020 default: ****************************************************************************** default: ****************************************************************************** default: Enable chronyd service. Sun 24 May 17:44:23 EDT 2020 default: ****************************************************************************** default: 503 No such source default: 200 OK default: ****************************************************************************** default: Configure shared disks. Sun 24 May 17:44:24 EDT 2020 default: ****************************************************************************** default: ****************************************************************************** default: Partition disks. Sun 24 May 17:44:24 EDT 2020 default: ****************************************************************************** default: default: Welcome to fdisk (util-linux 2.32.1). default: Changes will remain in memory only, until you decide to write them. default: Be careful before using the write command. default: Device does not contain a recognized partition table. default: Created a new DOS disklabel with disk identifier 0xc3fbb806. default: default: Command (m for help): Partition type default: p primary (0 primary, 0 extended, 4 free) default: e extended (container for logical partitions) default: Select (default p): default: Partition number (1-4, default 1): default: First sector (2048-4194303, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-4194303, default 4194303): default: default: Created a new partition 1 of type 'Linux' and of size 2 GiB. default: default: Command (m for help): default: The partition table has been altered. default: Calling ioctl() to re-read partition table. default: Syncing disks. default: default: Welcome to fdisk (util-linux 2.32.1). default: Changes will remain in memory only, until you decide to write them. default: Be careful before using the write command. default: Device does not contain a recognized partition table. default: Created a new DOS disklabel with disk identifier 0xdaa7cb61. default: default: Command (m for help): Partition type default: p primary (0 primary, 0 extended, 4 free) default: e extended (container for logical partitions) default: Select (default p): Partition number (1-4, default 1): First sector (2048-4194303, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-4194303, default 4194303): default: default: Created a new partition 1 of type 'Linux' and of size 2 GiB. default: default: Command (m for help): default: The partition table has been altered. default: Calling ioctl() to re-read partition table. default: Syncing disks. default: default: Welcome to fdisk (util-linux 2.32.1). default: Changes will remain in memory only, until you decide to write them. default: Be careful before using the write command. default: default: Device does not contain a recognized partition table. default: Created a new DOS disklabel with disk identifier 0xcf2c3392. default: default: Command (m for help): Partition type default: p primary (0 primary, 0 extended, 4 free) default: e extended (container for logical partitions) default: Select (default p): Partition number (1-4, default 1): First sector (2048-4194303, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-4194303, default 4194303): default: Created a new partition 1 of type 'Linux' and of size 2 GiB. default: default: Command (m for help): The partition table has been altered. default: Calling ioctl() to re-read partition table. default: Syncing disks. default: default: Welcome to fdisk (util-linux 2.32.1). default: Changes will remain in memory only, until you decide to write them. default: Be careful before using the write command. default: Device does not contain a recognized partition table. default: Created a new DOS disklabel with disk identifier 0x22c49e64. default: default: Command (m for help): default: Partition type default: p primary (0 primary, 0 extended, 4 free) default: e extended (container for logical partitions) default: Select (default p): default: Partition number (1-4, default 1): First sector (2048-83886079, default 2048): default: Last sector, +sectors or +size{K,M,G,T,P} (2048-83886079, default 83886079): default: default: Created a new partition 1 of type 'Linux' and of size 40 GiB. default: default: Command (m for help): default: The partition table has been altered. default: Calling ioctl() to re-read partition table. default: Syncing disks. default: default: Welcome to fdisk (util-linux 2.32.1). default: Changes will remain in memory only, until you decide to write them. default: Be careful before using the write command. default: Device does not contain a recognized partition table. default: Created a new DOS disklabel with disk identifier 0x1bd7e648. default: default: Command (m for help): Partition type default: p primary (0 primary, 0 extended, 4 free) default: e extended (container for logical partitions) default: Select (default p): Partition number (1-4, default 1): default: First sector (2048-41943039, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-41943039, default 41943039): default: default: Created a new partition 1 of type 'Linux' and of size 20 GiB. default: default: Command (m for help): default: The partition table has been altered. default: Calling ioctl() to re-read partition table. default: Syncing disks. default: /dev/sda default: /dev/sda1 default: /dev/sda2 default: /dev/sdb default: /dev/sdb1 default: /dev/sdc default: /dev/sdc1 default: /dev/sdd default: /dev/sdd1 default: /dev/sde default: /dev/sde1 default: /dev/sdf default: /dev/sdf1 default: /dev/sdg default: /dev/sdg1 default: ****************************************************************************** default: Configure udev. Sun 24 May 17:44:24 EDT 2020 default: ****************************************************************************** default: ****************************************************************************** default: Reload UDEV Rules. Sun 24 May 17:44:24 EDT 2020 default: ****************************************************************************** default: brw-rw----. 1 root disk 8, 1 May 24 17:41 /dev/sda1 default: brw-rw----. 1 root disk 8, 17 May 24 17:42 /dev/sdb1 default: brw-rw----. 1 root disk 8, 33 May 24 17:44 /dev/sdc1 default: brw-rw----. 1 root disk 8, 49 May 24 17:44 /dev/sdd1 default: brw-rw----. 1 root disk 8, 65 May 24 17:44 /dev/sde1 default: brw-rw----. 1 root disk 8, 81 May 24 17:44 /dev/sdf1 default: brw-------. 1 root root 8, 97 May 24 17:44 /dev/sdg1 default: lrwxrwxrwx. 1 root root 7 May 24 17:44 /dev/oracleasm/asm-crs-disk1 -> ../sdc1 default: lrwxrwxrwx. 1 root root 7 May 24 17:44 /dev/oracleasm/asm-crs-disk2 -> ../sdd1 default: lrwxrwxrwx. 1 root root 7 May 24 17:44 /dev/oracleasm/asm-crs-disk3 -> ../sde1 default: lrwxrwxrwx. 1 root root 7 May 24 17:44 /dev/oracleasm/asm-data-disk1 -> ../sdf1 default: lrwxrwxrwx. 1 root root 7 May 24 17:44 /dev/oracleasm/asm-reco-disk1 -> ../sdg1 default: ****************************************************************************** default: Set Hostname. Sun 24 May 17:45:15 EDT 2020 default: ****************************************************************************** default: ****************************************************************************** default: Create environment scripts. Sun 24 May 17:45:16 EDT 2020 default: ****************************************************************************** default: ****************************************************************************** default: Create directories. Sun 24 May 17:45:16 EDT 2020 default: ****************************************************************************** default: ****************************************************************************** default: Passwordless SSH Setup for oracle. Sun 24 May 17:45:16 EDT 2020 default: ****************************************************************************** default: # ol8-19-rac2:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2.localdomain:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2.localdomain:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2.localdomain:22 SSH-2.0-OpenSSH_8.0 default: # 192.168.56.102:22 SSH-2.0-OpenSSH_8.0 default: # 192.168.56.102:22 SSH-2.0-OpenSSH_8.0 default: # 192.168.56.102:22 SSH-2.0-OpenSSH_8.0 default: # localhost:22 SSH-2.0-OpenSSH_8.0 default: # localhost:22 SSH-2.0-OpenSSH_8.0 default: # localhost:22 SSH-2.0-OpenSSH_8.0 default: Sun 24 May 17:45:18 EDT 2020 default: ****************************************************************************** default: Passwordless SSH Setup for root. Sun 24 May 17:45:18 EDT 2020 default: ****************************************************************************** default: # ol8-19-rac2:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2.localdomain:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2.localdomain:22 SSH-2.0-OpenSSH_8.0 default: # ol8-19-rac2.localdomain:22 SSH-2.0-OpenSSH_8.0 default: # 192.168.56.102:22 SSH-2.0-OpenSSH_8.0 default: # 192.168.56.102:22 SSH-2.0-OpenSSH_8.0 default: # 192.168.56.102:22 SSH-2.0-OpenSSH_8.0 default: # localhost:22 SSH-2.0-OpenSSH_8.0 default: # localhost:22 SSH-2.0-OpenSSH_8.0 default: # localhost:22 SSH-2.0-OpenSSH_8.0 default: Sun 24 May 17:45:19 EDT 2020 default: ****************************************************************************** default: Setup End. Sun 24 May 17:45:19 EDT 2020 default: ******************************************************************************