8i | 9i | 10g | 11g | 12c | 13c | 18c | 19c | 21c | 23c | Misc | PL/SQL | SQL | RAC | WebLogic | Linux
Multitenant : Upgrading to Oracle Database 19c
This article provides an overview of upgrading an existing multitenant database to Oracle 19c. Upgrades can be very complicated, so you must always read the upgrade manual, and test thoroughly before considering an upgrade of a production environment.
Remember, 19c is essentially 12.2.0.3, so the possible upgrade options will be similar to those described in upgrading to Oracle Database 12c.
- Assumptions
- Prerequisites
- Install 19c Software
- Run preupgrade.jar
- Perform Pre-Upgrade Actions
- Upgrade the Database
- Perform Post-Upgrade Actions
- Final Steps
Related articles.
- Upgrading to Oracle Database 19c (Non-CDB)
- Multitenant : Upgrade a PDB using Unplug/Plugin
- Multitenant : PDB Upgrades Using Priority Lists, Inclusion Lists and Exclusion Lists in Oracle Database 12c Release 2 (12.2)
- Upgrading to Oracle Database 12c
- Multitenant : All Articles
- Upgrade the Database Time Zone File Using the DBMS_DST Package
Assumptions
This article is focused on upgrading a multitenant database. If your starting point is a non-CDB database, you should be reading the following article.
This article assumes your source database is of a version supported for direct upgrade to 19c. This is the whole list, but remember multitenant database have only existed from 12.1.0.1 onward.
11.2.0.4, 12.1.0.2, 12.2.0.1, 18
In this example we are doing an upgrade from 12.2 to 19c. The process is very similar for version 12.1, but the pre-upgrade and post-upgrade fixup actions may vary a little.
It's important to have backups of everything before you start! Some of these steps are destructive, and if something goes wrong you have no alternative but to restore from backups and start again.
Remember, this article is not a replacement for reading the upgrade documentation. Each upgrade has the potential to be different, depending on what options are installed.
Prerequisites
Make sure you have all the OS prerequisites in place by running the 19c preinstall package. On Oracle Linux you can do this by installing the preinstall package. It probably makes sense to update the remaining packages also.
yum install -y oracle-database-preinstall-19c yum update -y
Install 19c Software
You can read about the installation process in more detail here, but for this example I'll keep it brief. The following commands will perform a silent installation of the 19c software.
export ORACLE_HOME=$ORACLE_BASE/product/19.0.0/dbhome_1
export SOFTWARE_DIR=/u01/software
export ORA_INVENTORY=/u01/app/oraInventory
mkdir -p ${ORACLE_HOME}
cd $ORACLE_HOME
/bin/unzip -oq ${SOFTWARE_DIR}/LINUX.X64_193000_db_home.zip
./runInstaller -ignorePrereq -waitforcompletion -silent \
-responseFile ${ORACLE_HOME}/install/response/db_install.rsp \
oracle.install.option=INSTALL_DB_SWONLY \
ORACLE_HOSTNAME=${ORACLE_HOSTNAME} \
UNIX_GROUP_NAME=oinstall \
INVENTORY_LOCATION=${ORA_INVENTORY} \
SELECTED_LANGUAGES=en,en_GB \
ORACLE_HOME=${ORACLE_HOME} \
ORACLE_BASE=${ORACLE_BASE} \
oracle.install.db.InstallEdition=EE \
oracle.install.db.OSDBA_GROUP=dba \
oracle.install.db.OSBACKUPDBA_GROUP=dba \
oracle.install.db.OSDGDBA_GROUP=dba \
oracle.install.db.OSKMDBA_GROUP=dba \
oracle.install.db.OSRACDBA_GROUP=dba \
SECURITY_UPDATES_VIA_MYORACLESUPPORT=false \
DECLINE_SECURITY_UPDATES=true
Run the root scripts when prompted.
As a root user, execute the following script(s):
1. /u01/app/oracle/product/19.0.0/dbhome_1/root.sh
At this point you should also patch the new Oracle home, but in this case we will forgo that step to keep things simple.
Run preupgrade.jar
Download the latest "preupgrade.jar" file from MOS 884522.1. If you don't have MOS access you can miss out the next step.
At the time of writing, the latest preupgrade.jar is the one shipped with 19c, so there is no need to download a newer one. It's worth checking to see if this situation has changed when you do your upgrade.
Put the latest "preupgrade.jar" into the 19c Oracle home.
export ORACLE_HOME=$ORACLE_BASE/product/19.0.0/dbhome_1 cd $ORACLE_HOME/rdbms/admin unzip -o /u01/software/preupgrade_19_cbuild_??_lf.zip
Make sure you are using the original Oracle home and run the "preupgrade.jar".
export ORACLE_SID=cdb1 export ORAENV_ASK=NO . oraenv export ORAENV_ASK=YES export ORACLE_HOME=$ORACLE_BASE/product/12.2.0.1/db_1 $ORACLE_BASE/product/19.0.0/dbhome_1/jdk/bin/java -jar $ORACLE_BASE/product/19.0.0/dbhome_1/rdbms/admin/preupgrade.jar TERMINAL TEXT
Here is the output from an example run against a 12.2 database. There is output for the root container, seed and any user-defined pluggable databases.
$ $ORACLE_BASE/product/19.0.0/dbhome_1/jdk/bin/java -jar $ORACLE_BASE/product/19.0.0/dbhome_1/rdbms/admin/preupgrade.jar TERMINAL TEXT
Report generated by Oracle Database Pre-Upgrade Information Tool Version
19.0.0.0.0 Build: 1 on 2019-02-27T18:57:00
Upgrade-To version: 19.0.0.0.0
=======================================
Status of the database prior to upgrade
=======================================
Database Name: CDB1
Container Name: CDB$ROOT
Container ID: 1
Version: 12.2.0.1.0
DB Patch Level: No Patch Bundle applied
Compatible: 12.2.0
Blocksize: 8192
Platform: Linux x86 64-bit
Timezone File: 26
Database log mode: NOARCHIVELOG
Readonly: FALSE
Edition: EE
Oracle Component Upgrade Action Current Status
---------------- -------------- --------------
Oracle Server [to be upgraded] VALID
JServer JAVA Virtual Machine [to be upgraded] VALID
Oracle XDK for Java [to be upgraded] VALID
Real Application Clusters [to be upgraded] OPTION OFF
Oracle Workspace Manager [to be upgraded] VALID
OLAP Analytic Workspace [to be upgraded] VALID
Oracle Label Security [to be upgraded] VALID
Oracle Database Vault [to be upgraded] VALID
Oracle Text [to be upgraded] VALID
Oracle XML Database [to be upgraded] VALID
Oracle Java Packages [to be upgraded] VALID
Oracle Multimedia [to be upgraded] VALID
Oracle Spatial [to be upgraded] VALID
Oracle OLAP API [to be upgraded] VALID
==============
BEFORE UPGRADE
==============
REQUIRED ACTIONS
================
None
RECOMMENDED ACTIONS
===================
1. (AUTOFIXUP) Gather stale data dictionary statistics prior to database
upgrade in off-peak time using:
EXECUTE DBMS_STATS.GATHER_DICTIONARY_STATS;
Dictionary statistics do not exist or are stale (not up-to-date).
Dictionary statistics help the Oracle optimizer find efficient SQL
execution plans and are essential for proper upgrade timing. Oracle
recommends gathering dictionary statistics in the last 24 hours before
database upgrade.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
2. (AUTOFIXUP) Gather statistics on fixed objects prior the upgrade.
None of the fixed object tables have had stats collected.
Gathering statistics on fixed objects, if none have been gathered yet, is
recommended prior to upgrading.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
INFORMATION ONLY
================
3. To help you keep track of your tablespace allocations, the following
AUTOEXTEND tablespaces are expected to successfully EXTEND during the
upgrade process.
Min Size
Tablespace Size For Upgrade
---------- ---------- -----------
SYSAUX 460 MB 500 MB
SYSTEM 800 MB 912 MB
TEMP 33 MB 150 MB
UNDOTBS1 65 MB 439 MB
Minimum tablespace sizes for upgrade are estimates.
4. No action needed.
Using default parallel upgrade options, this CDB with 2 PDBs will first
upgrade the CDB$ROOT, and then upgrade at most 1 PDBs at a time using 2
parallel processes per PDB.
The number of PDBs upgraded in parallel and the number of parallel
processes per PDB can be adjusted as described in Database Upgrade Guide.
5. Check the Oracle Backup and Recovery User's Guide for information on how
to manage an RMAN recovery catalog schema.
If you are using a version of the recovery catalog schema that is older
than that required by the RMAN client version, then you must upgrade the
catalog schema.
It is good practice to have the catalog schema the same or higher version
than the RMAN client version you are using.
ORACLE GENERATED FIXUP SCRIPT
=============================
All of the issues in database CDB1 container CDB$ROOT
which are identified above as BEFORE UPGRADE "(AUTOFIXUP)" can be resolved by
executing the following from within the container
SQL>@/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/preupgrade_fixups.sql
=============
AFTER UPGRADE
=============
REQUIRED ACTIONS
================
None
RECOMMENDED ACTIONS
===================
6. Upgrade the database time zone file using the DBMS_DST package.
The database is using time zone file version 26 and the target 19 release
ships with time zone file version 32.
Oracle recommends upgrading to the desired (latest) version of the time
zone file. For more information, refer to "Upgrading the Time Zone File
and Timestamp with Time Zone Data" in the 19 Oracle Database
Globalization Support Guide.
7. To identify directory objects with symbolic links in the path name, run
$ORACLE_HOME/rdbms/admin/utldirsymlink.sql AS SYSDBA after upgrade.
Recreate any directory objects listed, using path names that contain no
symbolic links.
Some directory object path names may currently contain symbolic links.
Starting in Release 18c, symbolic links are not allowed in directory
object path names used with BFILE data types, the UTL_FILE package, or
external tables.
8. (AUTOFIXUP) Gather dictionary statistics after the upgrade using the
command:
EXECUTE DBMS_STATS.GATHER_DICTIONARY_STATS;
Oracle recommends gathering dictionary statistics after upgrade.
Dictionary statistics provide essential information to the Oracle
optimizer to help it find efficient SQL execution plans. After a database
upgrade, statistics need to be re-gathered as there can now be tables
that have significantly changed during the upgrade or new tables that do
not have statistics gathered yet.
9. Gather statistics on fixed objects after the upgrade and when there is a
representative workload on the system using the command:
EXECUTE DBMS_STATS.GATHER_FIXED_OBJECTS_STATS;
This recommendation is given for all preupgrade runs.
Fixed object statistics provide essential information to the Oracle
optimizer to help it find efficient SQL execution plans. Those
statistics are specific to the Oracle Database release that generates
them, and can be stale upon database upgrade.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
ORACLE GENERATED FIXUP SCRIPT
=============================
All of the issues in database CDB1 container CDB$ROOT
which are identified above as AFTER UPGRADE "(AUTOFIXUP)" can be resolved by
executing the following from within the container
SQL>@/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/postupgrade_fixups.sql
Report generated by Oracle Database Pre-Upgrade Information Tool Version
19.0.0.0.0 Build: 1 on 2019-02-27T18:57:16
Upgrade-To version: 19.0.0.0.0
=======================================
Status of the database prior to upgrade
=======================================
Database Name: CDB1
Container Name: PDB$SEED
Container ID: 2
Version: 12.2.0.1.0
DB Patch Level: No Patch Bundle applied
Compatible: 12.2.0
Blocksize: 8192
Platform: Linux x86 64-bit
Timezone File: 26
Database log mode: NOARCHIVELOG
Readonly: TRUE
Edition: EE
Oracle Component Upgrade Action Current Status
---------------- -------------- --------------
Oracle Server [to be upgraded] VALID
JServer JAVA Virtual Machine [to be upgraded] VALID
Oracle XDK for Java [to be upgraded] VALID
Real Application Clusters [to be upgraded] OPTION OFF
Oracle Workspace Manager [to be upgraded] VALID
OLAP Analytic Workspace [to be upgraded] VALID
Oracle Label Security [to be upgraded] VALID
Oracle Database Vault [to be upgraded] VALID
Oracle Text [to be upgraded] VALID
Oracle XML Database [to be upgraded] VALID
Oracle Java Packages [to be upgraded] VALID
Oracle Multimedia [to be upgraded] VALID
Oracle Spatial [to be upgraded] VALID
Oracle OLAP API [to be upgraded] VALID
==============
BEFORE UPGRADE
==============
REQUIRED ACTIONS
================
None
RECOMMENDED ACTIONS
===================
1. (AUTOFIXUP) Gather stale data dictionary statistics prior to database
upgrade in off-peak time using:
EXECUTE DBMS_STATS.GATHER_DICTIONARY_STATS;
Dictionary statistics do not exist or are stale (not up-to-date).
Dictionary statistics help the Oracle optimizer find efficient SQL
execution plans and are essential for proper upgrade timing. Oracle
recommends gathering dictionary statistics in the last 24 hours before
database upgrade.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
2. (AUTOFIXUP) Gather statistics on fixed objects prior the upgrade.
None of the fixed object tables have had stats collected.
Gathering statistics on fixed objects, if none have been gathered yet, is
recommended prior to upgrading.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
INFORMATION ONLY
================
3. To help you keep track of your tablespace allocations, the following
AUTOEXTEND tablespaces are expected to successfully EXTEND during the
upgrade process.
Min Size
Tablespace Size For Upgrade
---------- ---------- -----------
SYSAUX 330 MB 500 MB
SYSTEM 250 MB 360 MB
TEMP 64 MB 150 MB
UNDOTBS1 100 MB 439 MB
Minimum tablespace sizes for upgrade are estimates.
4. No action needed.
Using default parallel upgrade options, this CDB with 1 PDBs will first
upgrade the CDB$ROOT, and then upgrade at most 1 PDBs at a time using 2
parallel processes per PDB.
The number of PDBs upgraded in parallel and the number of parallel
processes per PDB can be adjusted as described in Database Upgrade Guide.
5. Check the Oracle Backup and Recovery User's Guide for information on how
to manage an RMAN recovery catalog schema.
If you are using a version of the recovery catalog schema that is older
than that required by the RMAN client version, then you must upgrade the
catalog schema.
It is good practice to have the catalog schema the same or higher version
than the RMAN client version you are using.
ORACLE GENERATED FIXUP SCRIPT
=============================
All of the issues in database CDB1 container PDB$SEED
which are identified above as BEFORE UPGRADE "(AUTOFIXUP)" can be resolved by
executing the following from within the container
SQL>@/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/preupgrade_fixups.sql
=============
AFTER UPGRADE
=============
REQUIRED ACTIONS
================
None
RECOMMENDED ACTIONS
===================
6. Upgrade the database time zone file using the DBMS_DST package.
The database is using time zone file version 26 and the target 19 release
ships with time zone file version 32.
Oracle recommends upgrading to the desired (latest) version of the time
zone file. For more information, refer to "Upgrading the Time Zone File
and Timestamp with Time Zone Data" in the 19 Oracle Database
Globalization Support Guide.
7. To identify directory objects with symbolic links in the path name, run
$ORACLE_HOME/rdbms/admin/utldirsymlink.sql AS SYSDBA after upgrade.
Recreate any directory objects listed, using path names that contain no
symbolic links.
Some directory object path names may currently contain symbolic links.
Starting in Release 18c, symbolic links are not allowed in directory
object path names used with BFILE data types, the UTL_FILE package, or
external tables.
8. (AUTOFIXUP) Gather dictionary statistics after the upgrade using the
command:
EXECUTE DBMS_STATS.GATHER_DICTIONARY_STATS;
Oracle recommends gathering dictionary statistics after upgrade.
Dictionary statistics provide essential information to the Oracle
optimizer to help it find efficient SQL execution plans. After a database
upgrade, statistics need to be re-gathered as there can now be tables
that have significantly changed during the upgrade or new tables that do
not have statistics gathered yet.
9. Gather statistics on fixed objects after the upgrade and when there is a
representative workload on the system using the command:
EXECUTE DBMS_STATS.GATHER_FIXED_OBJECTS_STATS;
This recommendation is given for all preupgrade runs.
Fixed object statistics provide essential information to the Oracle
optimizer to help it find efficient SQL execution plans. Those
statistics are specific to the Oracle Database release that generates
them, and can be stale upon database upgrade.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
ORACLE GENERATED FIXUP SCRIPT
=============================
All of the issues in database CDB1 container PDB$SEED
which are identified above as AFTER UPGRADE "(AUTOFIXUP)" can be resolved by
executing the following from within the container
SQL>@/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/postupgrade_fixups.sql
Report generated by Oracle Database Pre-Upgrade Information Tool Version
19.0.0.0.0 Build: 1 on 2019-02-27T18:57:29
Upgrade-To version: 19.0.0.0.0
=======================================
Status of the database prior to upgrade
=======================================
Database Name: CDB1
Container Name: PDB1
Container ID: 3
Version: 12.2.0.1.0
DB Patch Level: No Patch Bundle applied
Compatible: 12.2.0
Blocksize: 8192
Platform: Linux x86 64-bit
Timezone File: 26
Database log mode: NOARCHIVELOG
Readonly: FALSE
Edition: EE
Oracle Component Upgrade Action Current Status
---------------- -------------- --------------
Oracle Server [to be upgraded] VALID
JServer JAVA Virtual Machine [to be upgraded] VALID
Oracle XDK for Java [to be upgraded] VALID
Real Application Clusters [to be upgraded] OPTION OFF
Oracle Workspace Manager [to be upgraded] VALID
OLAP Analytic Workspace [to be upgraded] VALID
Oracle Label Security [to be upgraded] VALID
Oracle Database Vault [to be upgraded] VALID
Oracle Text [to be upgraded] VALID
Oracle XML Database [to be upgraded] VALID
Oracle Java Packages [to be upgraded] VALID
Oracle Multimedia [to be upgraded] VALID
Oracle Spatial [to be upgraded] VALID
Oracle OLAP API [to be upgraded] VALID
==============
BEFORE UPGRADE
==============
REQUIRED ACTIONS
================
None
RECOMMENDED ACTIONS
===================
1. (AUTOFIXUP) Gather stale data dictionary statistics prior to database
upgrade in off-peak time using:
EXECUTE DBMS_STATS.GATHER_DICTIONARY_STATS;
Dictionary statistics do not exist or are stale (not up-to-date).
Dictionary statistics help the Oracle optimizer find efficient SQL
execution plans and are essential for proper upgrade timing. Oracle
recommends gathering dictionary statistics in the last 24 hours before
database upgrade.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
2. (AUTOFIXUP) Gather statistics on fixed objects prior the upgrade.
None of the fixed object tables have had stats collected.
Gathering statistics on fixed objects, if none have been gathered yet, is
recommended prior to upgrading.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
INFORMATION ONLY
================
3. To help you keep track of your tablespace allocations, the following
AUTOEXTEND tablespaces are expected to successfully EXTEND during the
upgrade process.
Min Size
Tablespace Size For Upgrade
---------- ---------- -----------
SYSAUX 680 MB 709 MB
SYSTEM 350 MB 464 MB
TEMP 64 MB 150 MB
UNDOTBS1 390 MB 441 MB
Minimum tablespace sizes for upgrade are estimates.
4. No action needed.
Using default parallel upgrade options, this CDB with 1 PDBs will first
upgrade the CDB$ROOT, and then upgrade at most 1 PDBs at a time using 2
parallel processes per PDB.
The number of PDBs upgraded in parallel and the number of parallel
processes per PDB can be adjusted as described in Database Upgrade Guide.
5. Check the Oracle Backup and Recovery User's Guide for information on how
to manage an RMAN recovery catalog schema.
If you are using a version of the recovery catalog schema that is older
than that required by the RMAN client version, then you must upgrade the
catalog schema.
It is good practice to have the catalog schema the same or higher version
than the RMAN client version you are using.
ORACLE GENERATED FIXUP SCRIPT
=============================
All of the issues in database CDB1 container PDB1
which are identified above as BEFORE UPGRADE "(AUTOFIXUP)" can be resolved by
executing the following from within the container
SQL>@/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/preupgrade_fixups.sql
=============
AFTER UPGRADE
=============
REQUIRED ACTIONS
================
None
RECOMMENDED ACTIONS
===================
6. Upgrade the database time zone file using the DBMS_DST package.
The database is using time zone file version 26 and the target 19 release
ships with time zone file version 32.
Oracle recommends upgrading to the desired (latest) version of the time
zone file. For more information, refer to "Upgrading the Time Zone File
and Timestamp with Time Zone Data" in the 19 Oracle Database
Globalization Support Guide.
7. To identify directory objects with symbolic links in the path name, run
$ORACLE_HOME/rdbms/admin/utldirsymlink.sql AS SYSDBA after upgrade.
Recreate any directory objects listed, using path names that contain no
symbolic links.
Some directory object path names may currently contain symbolic links.
Starting in Release 18c, symbolic links are not allowed in directory
object path names used with BFILE data types, the UTL_FILE package, or
external tables.
8. (AUTOFIXUP) Gather dictionary statistics after the upgrade using the
command:
EXECUTE DBMS_STATS.GATHER_DICTIONARY_STATS;
Oracle recommends gathering dictionary statistics after upgrade.
Dictionary statistics provide essential information to the Oracle
optimizer to help it find efficient SQL execution plans. After a database
upgrade, statistics need to be re-gathered as there can now be tables
that have significantly changed during the upgrade or new tables that do
not have statistics gathered yet.
9. Gather statistics on fixed objects after the upgrade and when there is a
representative workload on the system using the command:
EXECUTE DBMS_STATS.GATHER_FIXED_OBJECTS_STATS;
This recommendation is given for all preupgrade runs.
Fixed object statistics provide essential information to the Oracle
optimizer to help it find efficient SQL execution plans. Those
statistics are specific to the Oracle Database release that generates
them, and can be stale upon database upgrade.
For information on managing optimizer statistics, refer to the 12.2.0.1
Oracle Database SQL Tuning Guide.
ORACLE GENERATED FIXUP SCRIPT
=============================
All of the issues in database CDB1 container PDB1
which are identified above as AFTER UPGRADE "(AUTOFIXUP)" can be resolved by
executing the following from within the container
SQL>@/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/postupgrade_fixups.sql
==================
PREUPGRADE SUMMARY
==================
/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/preupgrade.log
/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/preupgrade_fixups.sql
/u01/app/oracle/cfgtoollogs/cdb1/preupgrade/postupgrade_fixups.sql
Execute fixup scripts across the entire CDB:
Before upgrade:
1. Execute preupgrade fixups with the below command
$ORACLE_HOME/perl/bin/perl -I$ORACLE_HOME/perl/lib -I$ORACLE_HOME/rdbms/admin $ORACLE_HOME/rdbms/admin/catcon.pl -l /u01/app/oracle/cfgtoollogs/cdb1/preupgrade/ -b preup_cdb1 /u01/app/oracle/cfgtoollogs/cdb1/preupgrade/preupgrade_fixups.sql
2. Review logs under /u01/app/oracle/cfgtoollogs/cdb1/preupgrade/
After the upgrade:
1. Execute postupgrade fixups with the below command
$ORACLE_HOME/perl/bin/perl -I$ORACLE_HOME/perl/lib -I$ORACLE_HOME/rdbms/admin $ORACLE_HOME/rdbms/admin/catcon.pl -l /u01/app/oracle/cfgtoollogs/cdb1/preupgrade/ -b postup_cdb1 /u01/app/oracle/cfgtoollogs/cdb1/preupgrade/postupgrade_fixups.sql
2. Review logs under /u01/app/oracle/cfgtoollogs/cdb1/preupgrade/
Preupgrade complete: 2019-02-27T18:57:34
$
Perform Pre-Upgrade Actions
The output from the "preupgrade.jar" lists a number of pre-upgrade recommendations. Some must be manually applied. Others are incorporated into the "preupgrade_fixups.sql" script. In the following example we will only run the "preupgrade_fixups.sql" script and recompile invalid objects. Remember, in a multitenant database we must run the pre-upgrade actions on the root, seed and all user-defined pluggable databases.
$ORACLE_HOME/perl/bin/perl \
-I$ORACLE_HOME/perl/lib \
-I$ORACLE_HOME/rdbms/admin \
$ORACLE_HOME/rdbms/admin/catcon.pl \
-l /u01/app/oracle/cfgtoollogs/cdb1/preupgrade/ \
-b preup_${ORACLE_SID} \
/u01/app/oracle/cfgtoollogs/${ORACLE_SID}/preupgrade/preupgrade_fixups.sql
We can recompile invalid objects in the all containers except the seed database using the following command.
$ORACLE_HOME/perl/bin/perl \
-I$ORACLE_HOME/perl/lib \
-I$ORACLE_HOME/rdbms/admin \
$ORACLE_HOME/rdbms/admin/catcon.pl \
-l /u01/app/oracle/cfgtoollogs/${ORACLE_SID}/preupgrade/ \
-b preup_${ORACLE_SID}_recompile \
-C 'PDB$SEED' \
$ORACLE_HOME/rdbms/admin/utlrp.sql
Upgrade the Database
With the pre-upgrade actions complete we can start the upgrade. Shutdown the source database.
sqlplus / as sysdba <<EOF shutdown immediate; exit; EOF
Copy the config files from the old to the new Oracle home. You should check the contents of the "listener.ora" file to see if there are any references to the Oracle home path. If there are, amend them.
cp $ORACLE_HOME/network/admin/*.ora $ORACLE_BASE/product/19.0.0/dbhome_1/network/admin
# Add this to $ORACLE_BASE/product/19.0.0/dbhome_1/network/admin/sqlnet.ora
# Need to correct password versions and remove this.
cat >> $ORACLE_BASE/product/19.0.0/dbhome_1/network/admin/sqlnet.ora <<EOF
# This should be temporary while you deal with old passwords.
SQLNET.ALLOWED_LOGON_VERSION_SERVER=11
EOF
cp $ORACLE_HOME/dbs/orapw${ORACLE_SID} $ORACLE_BASE/product/19.0.0/dbhome_1/dbs/
cp $ORACLE_HOME/dbs/spfile${ORACLE_SID}.ora $ORACLE_BASE/product/19.0.0/dbhome_1/dbs/
Switch to the 19c listener.
lsnrctl stop
export ORACLE_HOME=$ORACLE_BASE/product/19.0.0/dbhome_1
export PATH=${ORACLE_HOME}/bin:$PATH
lsnrctl start
Start the database using the 19c Oracle home, ready for the upgrade. All user-defined PDBs must also be open in upgrade mode, or they will not be included in the upgrade, and will need to be upgraded manually later.
sqlplus / as sysdba <<EOF startup upgrade; alter pluggable database all open upgrade force; exit; EOF
You can run the upgrade using either of the following commands. The second is actually just a shorthand for the former.
# Regular upgrade command. cd $ORACLE_HOME/rdbms/admin $ORACLE_HOME/perl/bin/perl catctl.pl catupgrd.sql # Shorthand command. $ORACLE_HOME/bin/dbupgrade
Here is the output from an example run against a 12.2 multitenant database. The output looks quite long, as the upgrade is run against the root, seed and user-defined PDBs.
$ $ORACLE_HOME/bin/dbupgrade
Argument list for [/u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catctl.pl]
For Oracle internal use only A = 0
Run in c = 0
Do not run in C = 0
Input Directory d = 0
Echo OFF e = 1
Simulate E = 0
Forced cleanup F = 0
Log Id i = 0
Child Process I = 0
Log Dir l = 0
Priority List Name L = 0
Upgrade Mode active M = 0
SQL Process Count n = 0
SQL PDB Process Count N = 0
Open Mode Normal o = 0
Start Phase p = 0
End Phase P = 0
Reverse Order r = 0
AutoUpgrade Resume R = 0
Script s = 0
Serial Run S = 0
RO User Tablespaces T = 0
Display Phases y = 0
Debug catcon.pm z = 0
Debug catctl.pl Z = 0
catctl.pl VERSION: [19.0.0.0.0]
STATUS: [Production]
BUILD: [RDBMS_19.2.0.0.0_LINUX.X64_190204]
/u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/orahome = [/u01/app/oracle/product/19.0.0/dbhome_1]
/u01/app/oracle/product/19.0.0/dbhome_1/bin/orabasehome = [/u01/app/oracle/product/19.0.0/dbhome_1]
catctlGetOraBaseLogDir = [/u01/app/oracle/product/19.0.0/dbhome_1]
Analyzing file /u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catupgrd.sql
Log file directory = [/tmp/cfgtoollogs/upgrade20190227190442]
catcon::set_log_file_base_path: ALL catcon-related output will be written to [/tmp/cfgtoollogs/upgrade20190227190442/catupgrd_catcon_9307.lst]
catcon::set_log_file_base_path: catcon: See [/tmp/cfgtoollogs/upgrade20190227190442/catupgrd*.log] files for output generated by scripts
catcon::set_log_file_base_path: catcon: See [/tmp/cfgtoollogs/upgrade20190227190442/catupgrd_*.lst] files for spool files, if any
Number of Cpus = 2
Database Name = cdb1
DataBase Version = 12.2.0.1.0
catcon::set_log_file_base_path: ALL catcon-related output will be written to [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdcdbroot_catcon_9307.lst]
catcon::set_log_file_base_path: catcon: See [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdcdbroot*.log] files for output generated by scripts
catcon::set_log_file_base_path: catcon: See [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdcdbroot_*.lst] files for spool files, if any
Log file directory = [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444]
Generated PDB Inclusion:[PDB$SEED PDB1]
Components in [CDB$ROOT]
Installed [APS CATALOG CATJAVA CATPROC CONTEXT DV JAVAVM OLS ORDIM OWM SDO XDB XML XOQ]
Not Installed [APEX EM MGW ODM RAC WK]
Parallel SQL Process Count (PDB) = 2
Parallel SQL Process Count (CDB$ROOT) = 4
Concurrent PDB Upgrades = 2
------------------------------------------------------
Phases [0-107] Start Time:[2019_02_27 19:04:45]
Container Lists Inclusion:[CDB$ROOT] Exclusion:[NONE]
------------------------------------------------------
*********** Executing Change Scripts ***********
Serial Phase #:0 [CDB$ROOT] Files:1 Time: 23s
*************** Catalog Core SQL ***************
Serial Phase #:1 [CDB$ROOT] Files:5 Time: 32s
Restart Phase #:2 [CDB$ROOT] Files:1 Time: 1s
*********** Catalog Tables and Views ***********
Parallel Phase #:3 [CDB$ROOT] Files:19 Time: 15s
Restart Phase #:4 [CDB$ROOT] Files:1 Time: 0s
************* Catalog Final Scripts ************
Serial Phase #:5 [CDB$ROOT] Files:7 Time: 13s
***************** Catproc Start ****************
Serial Phase #:6 [CDB$ROOT] Files:1 Time: 10s
***************** Catproc Types ****************
Serial Phase #:7 [CDB$ROOT] Files:2 Time: 9s
Restart Phase #:8 [CDB$ROOT] Files:1 Time: 0s
**************** Catproc Tables ****************
Parallel Phase #:9 [CDB$ROOT] Files:67 Time: 22s
Restart Phase #:10 [CDB$ROOT] Files:1 Time: 1s
************* Catproc Package Specs ************
Serial Phase #:11 [CDB$ROOT] Files:1 Time: 52s
Restart Phase #:12 [CDB$ROOT] Files:1 Time: 1s
************** Catproc Procedures **************
Parallel Phase #:13 [CDB$ROOT] Files:94 Time: 7s
Restart Phase #:14 [CDB$ROOT] Files:1 Time: 0s
Parallel Phase #:15 [CDB$ROOT] Files:120 Time: 13s
Restart Phase #:16 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:17 [CDB$ROOT] Files:22 Time: 3s
Restart Phase #:18 [CDB$ROOT] Files:1 Time: 0s
***************** Catproc Views ****************
Parallel Phase #:19 [CDB$ROOT] Files:32 Time: 16s
Restart Phase #:20 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:21 [CDB$ROOT] Files:3 Time: 12s
Restart Phase #:22 [CDB$ROOT] Files:1 Time: 0s
Parallel Phase #:23 [CDB$ROOT] Files:25 Time: 136s
Restart Phase #:24 [CDB$ROOT] Files:1 Time: 0s
Parallel Phase #:25 [CDB$ROOT] Files:12 Time: 83s
Restart Phase #:26 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:27 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:28 [CDB$ROOT] Files:3 Time: 5s
Serial Phase #:29 [CDB$ROOT] Files:1 Time: 0s
Restart Phase #:30 [CDB$ROOT] Files:1 Time: 0s
*************** Catproc CDB Views **************
Serial Phase #:31 [CDB$ROOT] Files:1 Time: 0s
Restart Phase #:32 [CDB$ROOT] Files:1 Time: 1s
Serial Phase #:34 [CDB$ROOT] Files:1 Time: 0s
***************** Catproc PLBs *****************
Serial Phase #:35 [CDB$ROOT] Files:293 Time: 19s
Serial Phase #:36 [CDB$ROOT] Files:1 Time: 0s
Restart Phase #:37 [CDB$ROOT] Files:1 Time: 1s
Serial Phase #:38 [CDB$ROOT] Files:6 Time: 2s
Restart Phase #:39 [CDB$ROOT] Files:1 Time: 0s
*************** Catproc DataPump ***************
Serial Phase #:40 [CDB$ROOT] Files:3 Time: 44s
Restart Phase #:41 [CDB$ROOT] Files:1 Time: 1s
****************** Catproc SQL *****************
Parallel Phase #:42 [CDB$ROOT] Files:13 Time: 85s
Restart Phase #:43 [CDB$ROOT] Files:1 Time: 0s
Parallel Phase #:44 [CDB$ROOT] Files:11 Time: 7s
Restart Phase #:45 [CDB$ROOT] Files:1 Time: 0s
Parallel Phase #:46 [CDB$ROOT] Files:3 Time: 2s
Restart Phase #:47 [CDB$ROOT] Files:1 Time: 0s
************* Final Catproc scripts ************
Serial Phase #:48 [CDB$ROOT] Files:1 Time: 7s
Restart Phase #:49 [CDB$ROOT] Files:1 Time: 0s
************** Final RDBMS scripts *************
Serial Phase #:50 [CDB$ROOT] Files:1 Time: 3s
************ Upgrade Component Start ***********
Serial Phase #:51 [CDB$ROOT] Files:1 Time: 0s
Restart Phase #:52 [CDB$ROOT] Files:1 Time: 0s
********** Upgrading Java and non-Java *********
Serial Phase #:53 [CDB$ROOT] Files:2 Time: 234s
***************** Upgrading XDB ****************
Restart Phase #:54 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:56 [CDB$ROOT] Files:3 Time: 5s
Serial Phase #:57 [CDB$ROOT] Files:3 Time: 2s
Parallel Phase #:58 [CDB$ROOT] Files:10 Time: 2s
Parallel Phase #:59 [CDB$ROOT] Files:25 Time: 4s
Serial Phase #:60 [CDB$ROOT] Files:4 Time: 6s
Serial Phase #:61 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:62 [CDB$ROOT] Files:32 Time: 2s
Serial Phase #:63 [CDB$ROOT] Files:1 Time: 0s
Parallel Phase #:64 [CDB$ROOT] Files:6 Time: 6s
Serial Phase #:65 [CDB$ROOT] Files:2 Time: 15s
Serial Phase #:66 [CDB$ROOT] Files:3 Time: 21s
**************** Upgrading ORDIM ***************
Restart Phase #:67 [CDB$ROOT] Files:1 Time: 1s
Serial Phase #:69 [CDB$ROOT] Files:1 Time: 1s
Parallel Phase #:70 [CDB$ROOT] Files:2 Time: 21s
Restart Phase #:71 [CDB$ROOT] Files:1 Time: 1s
Parallel Phase #:72 [CDB$ROOT] Files:2 Time: 0s
Serial Phase #:73 [CDB$ROOT] Files:2 Time: 1s
***************** Upgrading SDO ****************
Restart Phase #:74 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:76 [CDB$ROOT] Files:1 Time: 31s
Serial Phase #:77 [CDB$ROOT] Files:2 Time: 3s
Restart Phase #:78 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:79 [CDB$ROOT] Files:1 Time: 35s
Restart Phase #:80 [CDB$ROOT] Files:1 Time: 0s
Parallel Phase #:81 [CDB$ROOT] Files:3 Time: 39s
Restart Phase #:82 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:83 [CDB$ROOT] Files:1 Time: 4s
Restart Phase #:84 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:85 [CDB$ROOT] Files:1 Time: 9s
Restart Phase #:86 [CDB$ROOT] Files:1 Time: 0s
Parallel Phase #:87 [CDB$ROOT] Files:4 Time: 60s
Restart Phase #:88 [CDB$ROOT] Files:1 Time: 1s
Serial Phase #:89 [CDB$ROOT] Files:1 Time: 0s
Restart Phase #:90 [CDB$ROOT] Files:1 Time: 1s
Serial Phase #:91 [CDB$ROOT] Files:2 Time: 6s
Restart Phase #:92 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:93 [CDB$ROOT] Files:1 Time: 3s
Restart Phase #:94 [CDB$ROOT] Files:1 Time: 0s
******* Upgrading ODM, WK, EXF, RUL, XOQ *******
Serial Phase #:95 [CDB$ROOT] Files:1 Time: 10s
Restart Phase #:96 [CDB$ROOT] Files:1 Time: 0s
*********** Final Component scripts ***********
Serial Phase #:97 [CDB$ROOT] Files:1 Time: 2s
************* Final Upgrade scripts ************
Serial Phase #:98 [CDB$ROOT] Files:1 Time: 9s
******************* Migration ******************
Serial Phase #:99 [CDB$ROOT] Files:1 Time: 2s
*** End PDB Application Upgrade Pre-Shutdown ***
Serial Phase #:100 [CDB$ROOT] Files:1 Time: 21s
Serial Phase #:101 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:102 [CDB$ROOT] Files:1 Time: 36s
***************** Post Upgrade *****************
Serial Phase #:103 [CDB$ROOT] Files:1 Time: 11s
**************** Summary report ****************
Serial Phase #:104 [CDB$ROOT] Files:1 Time: 1s
*** End PDB Application Upgrade Post-Shutdown **
Serial Phase #:105 [CDB$ROOT] Files:1 Time: 7s
Serial Phase #:106 [CDB$ROOT] Files:1 Time: 0s
Serial Phase #:107 [CDB$ROOT] Files:1 Time: 64s
------------------------------------------------------
Phases [0-107] End Time:[2019_02_27 19:26:28]
Container Lists Inclusion:[CDB$ROOT] Exclusion:[NONE]
------------------------------------------------------
Start processing of PDBs (PDB$SEED)
[/u01/app/oracle/product/19.0.0/dbhome_1/perl/bin/perl /u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catctl.pl -I -i pdb_seed -n 2 -c 'PDB$SEED' -l /u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444 /u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catupgrd.sql]
Start processing of PDBs (PDB1)
[/u01/app/oracle/product/19.0.0/dbhome_1/perl/bin/perl /u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catctl.pl -I -i pdb1 -n 2 -c 'PDB1' -l /u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444 /u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catupgrd.sql]
Argument list for [/u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catctl.pl]
For Oracle internal use only A = 0
Run in c = PDB1
Do not run in C = 0
Input Directory d = 0
Echo OFF e = 1
Simulate E = 0
Forced cleanup F = 0
Log Id i = pdb1
Child Process I = 1
Log Dir l = /u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444
Priority List Name L = 0
Upgrade Mode active M = 0
SQL Process Count n = 2
SQL PDB Process Count N = 0
Open Mode Normal o = 0
Start Phase p = 0
End Phase P = 0
Reverse Order r = 0
AutoUpgrade Resume R = 0
Script s = 0
Serial Run S = 0
RO User Tablespaces T = 0
Display Phases y = 0
Debug catcon.pm z = 0
Debug catctl.pl Z = 0
catctl.pl VERSION: [19.0.0.0.0]
STATUS: [Production]
BUILD: [RDBMS_19.2.0.0.0_LINUX.X64_190204]
Argument list for [/u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catctl.pl]
For Oracle internal use only A = 0
Run in c = PDB$SEED
Do not run in C = 0
Input Directory d = 0
Echo OFF e = 1
Simulate E = 0
Forced cleanup F = 0
Log Id i = pdb_seed
Child Process I = 1
Log Dir l = /u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444
Priority List Name L = 0
Upgrade Mode active M = 0
SQL Process Count n = 2
SQL PDB Process Count N = 0
Open Mode Normal o = 0
Start Phase p = 0
End Phase P = 0
Reverse Order r = 0
AutoUpgrade Resume R = 0
Script s = 0
Serial Run S = 0
RO User Tablespaces T = 0
Display Phases y = 0
Debug catcon.pm z = 0
Debug catctl.pl Z = 0
catctl.pl VERSION: [19.0.0.0.0]
STATUS: [Production]
BUILD: [RDBMS_19.2.0.0.0_LINUX.X64_190204]
/u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/orahome = [/u01/app/oracle/product/19.0.0/dbhome_1]
/u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/orahome = [/u01/app/oracle/product/19.0.0/dbhome_1]
/u01/app/oracle/product/19.0.0/dbhome_1/bin/orabasehome = [/u01/app/oracle/product/19.0.0/dbhome_1]
catctlGetOraBaseLogDir = [/u01/app/oracle/product/19.0.0/dbhome_1]
Analyzing file /u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catupgrd.sql
Log file directory = [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444]
/u01/app/oracle/product/19.0.0/dbhome_1/bin/orabasehome = [/u01/app/oracle/product/19.0.0/dbhome_1]
catctlGetOraBaseLogDir = [/u01/app/oracle/product/19.0.0/dbhome_1]
Analyzing file /u01/app/oracle/product/19.0.0/dbhome_1/rdbms/admin/catupgrd.sql
Log file directory = [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444]
catcon::set_log_file_base_path: ALL catcon-related output will be written to [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdpdb_seed_catcon_17759.lst]
catcon::set_log_file_base_path: catcon: See [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdpdb_seed*.log] files for output generated by scripts
catcon::set_log_file_base_path: catcon: See [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdpdb_seed_*.lst] files for spool files, if any
catcon::set_log_file_base_path: ALL catcon-related output will be written to [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdpdb1_catcon_17761.lst]
catcon::set_log_file_base_path: catcon: See [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdpdb1*.log] files for output generated by scripts
catcon::set_log_file_base_path: catcon: See [/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdpdb1_*.lst] files for spool files, if any
Number of Cpus = 2
Number of Cpus = 2
Database Name = cdb1
Database Name = cdb1
DataBase Version = 19.0.0.0.0
DataBase Version = 19.0.0.0.0
PDB$SEED Open Mode = [MIGRATE]
Generated PDB Inclusion:[PDB$SEED]
CDB$ROOT Open Mode = [OPEN]
Components in [PDB$SEED]
Installed [APS CATALOG CATJAVA CATPROC CONTEXT DV JAVAVM OLS ORDIM OWM SDO XDB XML XOQ]
Not Installed [APEX EM MGW ODM RAC WK]
PDB1 Open Mode = [MIGRATE]
Generated PDB Inclusion:[PDB1]
CDB$ROOT Open Mode = [OPEN]
Components in [PDB1]
Installed [APEX APS CATALOG CATJAVA CATPROC CONTEXT DV JAVAVM OLS ORDIM OWM SDO XDB XML XOQ]
Not Installed [EM MGW ODM RAC WK]
------------------------------------------------------
Phases [0-107] Start Time:[2019_02_27 19:26:38]
Container Lists Inclusion:[PDB$SEED] Exclusion:[NONE]
------------------------------------------------------
*********** Executing Change Scripts ***********
Serial Phase #:0 [PDB$SEED] Files:1
------------------------------------------------------
Phases [0-107] Start Time:[2019_02_27 19:26:38]
Container Lists Inclusion:[PDB1] Exclusion:[NONE]
------------------------------------------------------
*********** Executing Change Scripts ***********
Serial Phase #:0 [PDB1] Files:1 Time: 25s
*************** Catalog Core SQL ***************
Serial Phase #:1 [PDB$SEED] Files:5 Time: 27s
*************** Catalog Core SQL ***************
Serial Phase #:1 [PDB1] Files:5 Time: 80s
Restart Phase #:2 [PDB$SEED] Files:1 Time: 0s
*********** Catalog Tables and Views ***********
Parallel Phase #:3 [PDB$SEED] Files:19 Time: 78s
Restart Phase #:2 [PDB1] Files:1 Time: 0s
*********** Catalog Tables and Views ***********
Parallel Phase #:3 [PDB1] Files:19 Time: 24s
Restart Phase #:4 [PDB$SEED] Files:1 Time: 24s
Restart Phase #:4 [PDB1] Files:1 Time: 0s
************* Catalog Final Scripts ************
Serial Phase #:5 [PDB1] Files:7 Time: 0s
************* Catalog Final Scripts ************
Serial Phase #:5 [PDB$SEED] Files:7 Time: 18s
***************** Catproc Start ****************
Serial Phase #:6 [PDB1] Files:1 Time: 18s
***************** Catproc Start ****************
Serial Phase #:6 [PDB$SEED] Files:1 Time: 9s
***************** Catproc Types ****************
Serial Phase #:7 [PDB1] Files:2 Time: 9s
***************** Catproc Types ****************
Serial Phase #:7 [PDB$SEED] Files:2 Time: 7s
Restart Phase #:8 [PDB$SEED] Files:1 Time: 0s
**************** Catproc Tables ****************
Parallel Phase #:9 [PDB$SEED] Files:67 Time: 7s
Restart Phase #:8 [PDB1] Files:1 Time: 0s
**************** Catproc Tables ****************
Parallel Phase #:9 [PDB1] Files:67 Time: 39s
Restart Phase #:10 [PDB1] Files:1 Time: 0s
************* Catproc Package Specs ************
Serial Phase #:11 [PDB1] Files:1 Time: 39s
Restart Phase #:10 [PDB$SEED] Files:1 Time: 1s
************* Catproc Package Specs ************
Serial Phase #:11 [PDB$SEED] Files:1 Time: 54s
Restart Phase #:12 [PDB1] Files:1 Time: 0s
************** Catproc Procedures **************
Parallel Phase #:13 [PDB1] Files:94 Time: 54s
Restart Phase #:12 [PDB$SEED] Files:1 Time: 0s
************** Catproc Procedures **************
Parallel Phase #:13 [PDB$SEED] Files:94 Time: 9s
Restart Phase #:14 [PDB1] Files:1 Time: 0s
Parallel Phase #:15 [PDB1] Files:120 Time: 9s
Restart Phase #:14 [PDB$SEED] Files:1 Time: 0s
Parallel Phase #:15 [PDB$SEED] Files:120 Time: 13s
Restart Phase #:16 [PDB1] Files:1 Time: 12s
Restart Phase #:16 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:17 [PDB$SEED] Files:22 Time: 0s
Serial Phase #:17 [PDB1] Files:22 Time: 2s
Restart Phase #:18 [PDB$SEED] Files:1 Time: 2s
Restart Phase #:18 [PDB1] Files:1 Time: 0s
***************** Catproc Views ****************
Parallel Phase #:19 [PDB$SEED] Files:32 Time: 0s
***************** Catproc Views ****************
Parallel Phase #:19 [PDB1] Files:32 Time: 24s
Restart Phase #:20 [PDB1] Files:1 Time: 24s
Restart Phase #:20 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:21 [PDB1] Files:3 Time: 0s
Serial Phase #:21 [PDB$SEED] Files:3 Time: 10s
Restart Phase #:22 [PDB$SEED] Files:1 Time: 0s
Parallel Phase #:23 [PDB$SEED] Files:25 Time: 10s
Restart Phase #:22 [PDB1] Files:1 Time: 1s
Parallel Phase #:23 [PDB1] Files:25 Time: 355s
Restart Phase #:24 [PDB1] Files:1 Time: 0s
Parallel Phase #:25 [PDB1] Files:12 Time: 360s
Restart Phase #:24 [PDB$SEED] Files:1 Time: 0s
Parallel Phase #:25 [PDB$SEED] Files:12 Time: 114s
Restart Phase #:26 [PDB1] Files:1 Time: 1s
Serial Phase #:27 [PDB1] Files:1 Time: 0s
Serial Phase #:28 [PDB1] Files:3 Time: 122s
Restart Phase #:26 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:27 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:28 [PDB$SEED] Files:3 Time: 13s
Serial Phase #:29 [PDB1] Files:1 Time: 0s
Restart Phase #:30 [PDB1] Files:1 Time: 0s
*************** Catproc CDB Views **************
Serial Phase #:31 [PDB1] Files:1 Time: 2s
Serial Phase #:29 [PDB$SEED] Files:1 Time: 0s
Restart Phase #:30 [PDB$SEED] Files:1 Time: 0s
*************** Catproc CDB Views **************
Serial Phase #:31 [PDB$SEED] Files:1 Time: 0s
Restart Phase #:32 [PDB1] Files:1 Time: 1s
Serial Phase #:34 [PDB1] Files:1 Time: 0s
***************** Catproc PLBs *****************
Serial Phase #:35 [PDB1] Files:293 Time: 1s
Restart Phase #:32 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:34 [PDB$SEED] Files:1 Time: 0s
***************** Catproc PLBs *****************
Serial Phase #:35 [PDB$SEED] Files:293 Time: 77s
Serial Phase #:36 [PDB$SEED] Files:1 Time: 0s
Restart Phase #:37 [PDB$SEED] Files:1 Time: 77s
Serial Phase #:36 [PDB1] Files:1 Time: 0s
Restart Phase #:37 [PDB1] Files:1 Time: 0s
Serial Phase #:38 [PDB$SEED] Files:6 Time: 0s
Serial Phase #:38 [PDB1] Files:6 Time: 3s
Restart Phase #:39 [PDB1] Files:1 Time: 3s
Restart Phase #:39 [PDB$SEED] Files:1 Time: 1s
*************** Catproc DataPump ***************
Serial Phase #:40 [PDB1] Files:3 Time: 1s
*************** Catproc DataPump ***************
Serial Phase #:40 [PDB$SEED] Files:3 Time: 35s
Restart Phase #:41 [PDB1] Files:1 Time: 35s
Restart Phase #:41 [PDB$SEED] Files:1 Time: 0s
****************** Catproc SQL *****************
Parallel Phase #:42 [PDB1] Files:13 Time: 1s
****************** Catproc SQL *****************
Parallel Phase #:42 [PDB$SEED] Files:13 Time: 124s
Restart Phase #:43 [PDB1] Files:1 Time: 1s
Parallel Phase #:44 [PDB1] Files:11 Time: 129s
Restart Phase #:43 [PDB$SEED] Files:1 Time: 5s
Restart Phase #:45 [PDB1] Files:1 Time: 0s
Parallel Phase #:44 [PDB$SEED] Files:11 Time: 0s
Parallel Phase #:46 [PDB1] Files:3 Time: 3s
Restart Phase #:47 [PDB1] Files:1 Time: 0s
************* Final Catproc scripts ************
Serial Phase #:48 [PDB1] Files:1 Time: 6s
Restart Phase #:45 [PDB$SEED] Files:1 Time: 0s
Parallel Phase #:46 [PDB$SEED] Files:3 Time: 2s
Restart Phase #:47 [PDB$SEED] Files:1 Time: 0s
************* Final Catproc scripts ************
Serial Phase #:48 [PDB$SEED] Files:1 Time: 8s
Restart Phase #:49 [PDB1] Files:1 Time: 1s
************** Final RDBMS scripts *************
Serial Phase #:50 [PDB1] Files:1 Time: 2s
************ Upgrade Component Start ***********
Serial Phase #:51 [PDB1] Files:1 Time: 1s
Restart Phase #:52 [PDB1] Files:1 Time: 0s
********** Upgrading Java and non-Java *********
Serial Phase #:53 [PDB1] Files:2 Time: 9s
Restart Phase #:49 [PDB$SEED] Files:1 Time: 0s
************** Final RDBMS scripts *************
Serial Phase #:50 [PDB$SEED] Files:1 Time: 3s
************ Upgrade Component Start ***********
Serial Phase #:51 [PDB$SEED] Files:1 Time: 0s
Restart Phase #:52 [PDB$SEED] Files:1 Time: 0s
********** Upgrading Java and non-Java *********
Serial Phase #:53 [PDB$SEED] Files:2 Time: 185s
***************** Upgrading XDB ****************
Restart Phase #:54 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:56 [PDB$SEED] Files:3 Time: 191s
***************** Upgrading XDB ****************
Restart Phase #:54 [PDB1] Files:1 Time: 0s
Serial Phase #:56 [PDB1] Files:3 Time: 4s
Serial Phase #:57 [PDB$SEED] Files:3 Time: 5s
Serial Phase #:57 [PDB1] Files:3 Time: 2s
Parallel Phase #:58 [PDB$SEED] Files:10 Time: 1s
Parallel Phase #:58 [PDB1] Files:10 Time: 2s
Parallel Phase #:59 [PDB$SEED] Files:25 Time: 2s
Parallel Phase #:59 [PDB1] Files:25 Time: 5s
Serial Phase #:60 [PDB$SEED] Files:4 Time: 4s
Serial Phase #:60 [PDB1] Files:4 Time: 7s
Serial Phase #:61 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:62 [PDB$SEED] Files:32 Time: 8s
Serial Phase #:61 [PDB1] Files:1 Time: 0s
Serial Phase #:62 [PDB1] Files:32 Time: 6s
Serial Phase #:63 [PDB$SEED] Files:1 Time: 0s
Parallel Phase #:64 [PDB$SEED] Files:6 Time: 5s
Serial Phase #:63 [PDB1] Files:1 Time: 0s
Parallel Phase #:64 [PDB1] Files:6 Time: 6s
Serial Phase #:65 [PDB$SEED] Files:2 Time: 6s
Serial Phase #:65 [PDB1] Files:2 Time: 17s
Serial Phase #:66 [PDB$SEED] Files:3 Time: 17s
Serial Phase #:66 [PDB1] Files:3 Time: 19s
**************** Upgrading ORDIM ***************
Restart Phase #:67 [PDB$SEED] Files:1 Time: 1s
Serial Phase #:69 [PDB$SEED] Files:1 Time: 20s
**************** Upgrading ORDIM ***************
Restart Phase #:67 [PDB1] Files:1 Time: 0s
Serial Phase #:69 [PDB1] Files:1 Time: 0s
Parallel Phase #:70 [PDB$SEED] Files:2 Time: 1s
Parallel Phase #:70 [PDB1] Files:2 Time: 9s
Restart Phase #:71 [PDB1] Files:1 Time: 10s
Restart Phase #:71 [PDB$SEED] Files:1 Time: 1s
Parallel Phase #:72 [PDB$SEED] Files:2 Time: 1s
Parallel Phase #:72 [PDB1] Files:2 Time: 0s
Serial Phase #:73 [PDB$SEED] Files:2 Time: 0s
Serial Phase #:73 [PDB1] Files:2 Time: 1s
***************** Upgrading SDO ****************
Restart Phase #:74 [PDB1] Files:1 Time: 1s
***************** Upgrading SDO ****************
Restart Phase #:74 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:76 [PDB1] Files:1 Time: 0s
Serial Phase #:76 [PDB$SEED] Files:1 Time: 30s
Serial Phase #:77 [PDB1] Files:2 Time: 31s
Serial Phase #:77 [PDB$SEED] Files:2 Time: 2s
Restart Phase #:78 [PDB1] Files:1 Time: 0s
Serial Phase #:79 [PDB1] Files:1 Time: 1s
Restart Phase #:78 [PDB$SEED] Files:1 Time: 1s
Serial Phase #:79 [PDB$SEED] Files:1 Time: 3s
Restart Phase #:80 [PDB1] Files:1 Time: 1s
Parallel Phase #:81 [PDB1] Files:3 Time: 3s
Restart Phase #:80 [PDB$SEED] Files:1 Time: 0s
Parallel Phase #:81 [PDB$SEED] Files:3 Time: 51s
Restart Phase #:82 [PDB$SEED] Files:1 Time: 51s
Restart Phase #:82 [PDB1] Files:1 Time: 1s
Serial Phase #:83 [PDB$SEED] Files:1 Time: 1s
Serial Phase #:83 [PDB1] Files:1 Time: 3s
Restart Phase #:84 [PDB$SEED] Files:1 Time: 3s
Restart Phase #:84 [PDB1] Files:1 Time: 0s
Serial Phase #:85 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:85 [PDB1] Files:1 Time: 6s
Restart Phase #:86 [PDB$SEED] Files:1 Time: 0s
Parallel Phase #:87 [PDB$SEED] Files:4 Time: 8s
Restart Phase #:86 [PDB1] Files:1 Time: 0s
Parallel Phase #:87 [PDB1] Files:4 Time: 73s
Restart Phase #:88 [PDB$SEED] Files:1 Time: 71s
Restart Phase #:88 [PDB1] Files:1 Time: 0s
Serial Phase #:89 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:89 [PDB1] Files:1 Time: 0s
Restart Phase #:90 [PDB$SEED] Files:1 Time: 0s
Restart Phase #:90 [PDB1] Files:1 Time: 1s
Serial Phase #:91 [PDB$SEED] Files:2 Time: 1s
Serial Phase #:91 [PDB1] Files:2 Time: 13s
Restart Phase #:92 [PDB$SEED] Files:1 Time: 13s
Restart Phase #:92 [PDB1] Files:1 Time: 0s
Serial Phase #:93 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:93 [PDB1] Files:1 Time: 1s
Restart Phase #:94 [PDB$SEED] Files:1 Time: 1s
Restart Phase #:94 [PDB1] Files:1 Time: 0s
******* Upgrading ODM, WK, EXF, RUL, XOQ *******
Serial Phase #:95 [PDB$SEED] Files:1 Time: 0s
******* Upgrading ODM, WK, EXF, RUL, XOQ *******
Serial Phase #:95 [PDB1] Files:1 Time: 9s
Restart Phase #:96 [PDB1] Files:1 Time: 0s
*********** Final Component scripts ***********
Serial Phase #:97 [PDB1] Files:1 Time: 9s
Restart Phase #:96 [PDB$SEED] Files:1 Time: 1s
*********** Final Component scripts ***********
Serial Phase #:97 [PDB$SEED] Files:1 Time: 1s
************* Final Upgrade scripts ************
Serial Phase #:98 [PDB$SEED] Files:1 Time: 2s
************* Final Upgrade scripts ************
Serial Phase #:98 [PDB1] Files:1 Time: 10s
******************* Migration ******************
Serial Phase #:99 [PDB1] Files:1 Time: 1s
*** End PDB Application Upgrade Pre-Shutdown ***
Serial Phase #:100 [PDB1] Files:1 Time: 0s
Serial Phase #:101 [PDB1] Files:1 Time: 11s
******************* Migration ******************
Serial Phase #:99 [PDB$SEED] Files:1 Time: 1s
*** End PDB Application Upgrade Pre-Shutdown ***
Serial Phase #:100 [PDB$SEED] Files:1 Time: 0s
Serial Phase #:101 [PDB$SEED] Files:1 Time: 2s
Serial Phase #:102 [PDB1] Files:1 Time: 2s
Serial Phase #:102 [PDB$SEED] Files:1 Time: 2s
***************** Post Upgrade *****************
Serial Phase #:103 [PDB1] Files:1 Time: 1s
***************** Post Upgrade *****************
Serial Phase #:103 [PDB$SEED] Files:1 Time: 12s
**************** Summary report ****************
Serial Phase #:104 [PDB1] Files:1 Time: 1s
*** End PDB Application Upgrade Post-Shutdown **
Serial Phase #:105 [PDB1] Files:1 Time: 1s
Serial Phase #:106 [PDB1] Files:1 Time: 1s
Serial Phase #:107 [PDB1] Files:1 Time: 0s
------------------------------------------------------
Phases [0-107] End Time:[2019_02_27 19:52:35]
Container Lists Inclusion:[PDB1] Exclusion:[NONE]
------------------------------------------------------
Grand Total Time: 1560s [PDB1]
LOG FILES: (/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdpdb1*.log)
Upgrade Summary Report Located in:
/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/upg_summary.log
Time: 263s
**************** Summary report ****************
Serial Phase #:104 [PDB$SEED] Files:1 Time: 0s
*** End PDB Application Upgrade Post-Shutdown **
Serial Phase #:105 [PDB$SEED] Files:1 Time: 1s
Serial Phase #:106 [PDB$SEED] Files:1 Time: 1s
Serial Phase #:107 [PDB$SEED] Files:1 Time: 0s
------------------------------------------------------
Phases [0-107] End Time:[2019_02_27 19:56:45]
Container Lists Inclusion:[PDB$SEED] Exclusion:[NONE]
------------------------------------------------------
Grand Total Time: 1811s [PDB$SEED]
LOG FILES: (/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdpdb_seed*.log)
Upgrade Summary Report Located in:
/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/upg_summary.log
Time: 1303s For CDB$ROOT
Time: 1823s For PDB(s)
Grand Total Time: 3126s
LOG FILES: (/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/catupgrdcdbroot*.log)
Upgrade Summary Report Located in:
/u01/app/oracle/product/19.0.0/dbhome_1/cfgtoollogs/cdb1/upgrade20190227190444/upg_summary.log
Grand Total Upgrade Time: [0d:0h:52m:6s]
$
Check out the "upg_summary.log" file, and if anything looks wrong, check out the associated "catupgrd*.log" file. At this point I do a shutdown and startup to make sure everything is running in the correct mode. Also make sure the user-defined PDBs are open before doing the post upgrade steps.
sqlplus / as sysdba <<EOF shutdown immediate; startup; column name format A30 select name, open_mode from v\$pdbs; exit; EOF
Perform Post-Upgrade Actions
The output from the "preupgrade.jar" lists a number of post-upgrade recommendations. Some must be manually applied. Others are incorporated into the "postupgrade_fixups.sql" script. In the following example we will only run the "postupgrade_fixups.sql" script. Remember, in a multitenant database we must run the post-upgrade actions on the root, seed and all user-defined pluggable databases.
$ORACLE_HOME/perl/bin/perl \
-I$ORACLE_HOME/perl/lib \
-I$ORACLE_HOME/rdbms/admin \
$ORACLE_HOME/rdbms/admin/catcon.pl \
-l /u01/app/oracle/cfgtoollogs/${ORACLE_SID}/preupgrade/ \
-b postup_cdb1 \
/u01/app/oracle/cfgtoollogs/${ORACLE_SID}/preupgrade/postupgrade_fixups.sql
Assuming you didn't hit any problems along the way, your database is upgraded and ready to go now.
Final Steps
Edit the "/etc/oratab" file, correcting the Oracle home path.
From: cdb1:/u01/app/oracle/product/12.2.0.1/db_1:Y To: cdb1:/u01/app/oracle/product/19.0.0/dbhome_1:Y
You need to consider what you are going to do with the COMPATIBLE parameter. I prefer to reset it as soon as possible.
sqlplus / as sysdba <<EOF alter system set compatible='19.0.0' scope=spfile; shutdown immediate; startup; EXIT; EOF
If local undo is not enabled, you need to enable it. You can read more about local undo here.
sqlplus / as sysdba <<EOF shutdown immediate; startup upgrade; alter database local undo on; shutdown immediate; startup; EXIT; EOF
If you are using APEX or ORDS, you probably want to validate them (validate APEX, validate ORDS).
For more information see:
- Oracle Database Upgrade Guide 19c
- Master Note For Oracle Database Upgrades and Migrations [ID 1152016.1]
- Different Upgrade Methods For Upgrading Your Database [ID 419550.1]
- Upgrading to Oracle Database 19c (Non-CDB)
- Multitenant : Upgrade a PDB using Unplug/Plugin
- Multitenant : PDB Upgrades Using Priority Lists, Inclusion Lists and Exclusion Lists in Oracle Database 12c Release 2 (12.2)
- Upgrading to Oracle Database 12c
- Multitenant : All Articles
- Upgrade the Database Time Zone File Using the DBMS_DST Package
Hope this helps. Regards Tim...