8i | 9i | 10g | 11g | 12c | 13c | 18c | 19c | 21c | 23ai | Misc | PL/SQL | SQL | RAC | WebLogic | Linux

Home » Articles » 10g » Here

Oracle 10g Release 5 Grid Control Installation On Oracle Linux 5.8 (OL 5.8 64-bit)

In this article I'll describe the installation of Oracle 10g Release 5 ( 64-bit) Grid Control on Oracle Linux 5.8 (OL 5.8 64-bit). The article is based on a server installation with a minimum of 2G RAM, 4G swap, firewall and secure Linux disabled and the following package groups installed.

You can see an example of this type of installation here.

The Oracle 10g Grid Control allows you to monitor all aspects of your infrastructure including database and application servers. Like the Oracle9i Management Server it replaces, the grid control requires a database repository. A complete installation includes a repository in a 10g database. It is possible to install the repository in an existing database of a different version, but I try to install the product as it is shipped.

The grid control uses agents on each server to enable monitoring and interaction. As a result, once the grid control is installed it is necessary to install an agent on each server you wish to monitor. The installation of an agent is described in it's owner section. All other tasks relate only to the grid control.

Download Software

Download the following software from here.

Notice we've downloaded the base release ( and the patch (

For convenience you may want to download the agent distribution separately. If you are monitoring servers on different platforms the relevant agents must be downloaded.

Unpack Files

First unzip the grid control installation files.

cd /host/software/oracle/GridControl

mkdir 10203
cd 10203
unzip ../Linux_x86_64_Grid_Control_full_102030_disk1.zip
unzip ../Linux_x86_64_Grid_Control_full_102030_disk2.zip

cd ..
mkdir 10205
cd 10205
unzip ../gc_x86_64_10205_part1of2.zip
unzip ../gc_x86_64_10205_part2of2.zip
unzip p3731593_10205_Linux-x86-64.zip

Hosts File

The "/etc/hosts" file must contain a fully qualified name for the server.

<IP-address>  <fully-qualified-machine-name>  <machine-name>

For example.       localhost.localdomain  localhost   ol5-10gr5-gc.localdomain  ol5-10gr5-gc

Oracle-Validated Setup

If you plan to use the "oracle-validated" package to perform all your prerequisite setup, follow the instructions at http://public-yum.oracle.com to setup the yum repository for OL, then perform the following command.

# yum install oracle-validated

All necessary prerequisites will be performed automatically.

Manual Setup

If you have not used the "oracle-validated" package to perform all prerequisites, you will need to manually perform the following setup tasks.

Modify the "/etc/sysctl.conf" file to include the lines appropriate to your operating system.

kernel.shmall = 2097152
kernel.shmmax = 536870912
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
# semaphores: semmsl, semmns, semopm, semmni
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144

Run the following command to change the current kernel parameters.

/sbin/sysctl -p

Add the following entries to the "/etc/security/limits.conf" file.

*               soft    nproc   2047
*               hard    nproc   16384
*               soft    nofile  1024
*               hard    nofile  65536

Append the following entry to the "/etc/pam.d/login" file.

session    required     pam_limits.so

Install the required packages, some of which may already be present.

yum install glibc-2*
yum install make-3*
yum install binutils-2*
yum install gcc-4*
yum install libaio-0*
yum install glibc-common-2*
yum install setarch-2*
yum install pdksh-5*
yum install sysstat-7*
yum install control-center-2*
yum install glibc-devel-2*
yum install libgcc-4*
yum install compat-gcc*
yum install compat-glibc*
yum install compat-libgcc-296*
yum install compat-libstdc++-296*
yum install compat-libstdc++-33.i386
yum install libstdc++-4*

Create the new groups and users.

groupadd oinstall
groupadd dba
groupadd oper

useradd -g oinstall -G dba -s /bin/ksh oracle
passwd oracle

Additional Setup

The following setup tasks must be performed regardless of which setup method you used previously.

Install the following packages.

yum install openmotif22*
yum install compat-db-4*
yum install compat-db.i386
yum install glibc-devel.i386
yum install libstdc++-devel-4*
yum install libgcc.i386
yum install openmotif-2*
yum install freetype-devel*
yum install fontconfig-devel*

Disable secure linux by editing the "/etc/selinux/config" file, making sure the SELINUX flag is set as follows.


Alternatively, this alteration can be done using the GUI tool (Applications > System Settings > Security Level). Click on the SELinux tab and disable the feature.

Create the directories in which the Oracle software will be installed.

mkdir -p /u01/app/oracle/product
chown -R oracle.oinstall /u01

Login as root and issue the following command.

xhost +<machine-name>

Login as the oracle user and add the following lines at the end of the ".bash_profile" file.

# Oracle Settings
TMP=/tmp; export TMP

ORACLE_BASE=/u01/app/oracle; export ORACLE_BASE
AGENT_HOME=$ORACLE_BASE/product/agent10g; export AGENT_HOME
OMS_HOME=$ORACLE_BASE/product/oms10g; export OMS_HOME
ORACLE_HOSTNAME=ol5-10gr5-gc.localdomain; export ORACLE_HOSTNAME
PATH=/usr/sbin:$PATH; export PATH


if [ $USER = "oracle" ]; then
  if [ $SHELL = "/bin/ksh" ]; then
    ulimit -p 16384
    ulimit -n 65536
    ulimit -u 16384 -n 65536

Grid Control Installation (

The quickest way to install a fully patched version of the grid control on a clean system is to perform software-only silent install with no configuration steps. First take a copy of the "em_with_new_db.rsp" response file from the "10203" software directory.

cp /host/software/oracle/GridControl/10203/Disk1/response/em_with_new_db.rsp /tmp

Amend the entries in the "/tmp/em_with_new_db.rsp" response file to suit your installation requirements. For this installation I used the following values. All other values in the response file were left unchanged.


The installation was then started in silent mode using the response file as follows.

$ cd /host/software/oracle/GridControl/10203/Disk1/
$ ./runInstaller -noconfig -ignoreSysPrereqs -silent -responseFile /tmp/em_with_new_db.rsp use_prereq_checker=false

On completion of the installation, the following configuration scripts were run as root.

# /u01/app/oracle/oraInventory/orainstRoot.sh
# cd /u01/app/oracle/product/db10g
# ./allroot.sh

At this point the software installation is complete, but the database and Oracle Management Server (OMS) have not been configured. Before patching, all OMS processes must be stopped using the following command.

$ $OMS_HOME/opmn/bin/opmnctl stopall

Grid Control Patch (

Both the Oracle Management Server (OMS) and the Agent are patched separately using variations on the same "patchset.rsp" response file from the "10205" software. Take a copy of the "patchset.rsp" response file.

cp /host/software/oracle/GridControl/10205/3731593/Disk1/response/patchset.rsp /tmp/patchset_oms.rsp

Amend the contents of the "/tmp/patchset_oms.rsp" file, changing only the values listed below. Leave all other values unchanged.

sl_pwdInfo={ "oms10gPassword" }
oracle.iappserver.st_midtier:szl_InstanceInformation={ "oms10gPassword" }
# Add this new parameter.

Start the silent installation of the patch software for the OMS with the following command.

$ cd /host/software/oracle/GridControl/10205/3731593/Disk1
$ ./runInstaller -noconfig -force -silent -responseFile /tmp/patchset_oms.rsp

Once the installation is complete, run the configuration script as the root user.

# cd /u01/app/oracle/product/oms10g
# ./root.sh

This script does not produce any output.

To patch the Agent, copy the "patchset_oms.rsp" file.

cp /tmp/patchset_oms.rsp /tmp/patchset_agent.rsp

Only the following values needs to be changed in the "/tmp/patchset_agent.rsp". All other settings match those for the OMS patch.


Start the silent installation of the patch software for the Agent with the following command.

$ cd /host/software/oracle/GridControl/10205/3731593/Disk1
$ ./runInstaller -noconfig -force -silent -responseFile /tmp/patchset_agent.rsp

Once the installation is complete, run the configuration script as the root user.

# cd /u01/app/oracle/product/agent10g
# ./root.sh

Configure Grid Control

Assuming all the installations and patches have completed with no errors we can now configure the database and the OMS.

Create the following file.

# ln -s /usr/lib/libgdbm.so.2 /usr/lib/libdb.so.2
# touch /etc/oraInst.loc
# chown oracle.oinstall /etc/oraInst.loc

Configure the database using the following command.

$ cd $ORACLE_HOME/oui/bin
$ ./runConfig.sh ORACLE_HOME=/u01/app/oracle/product/db10g ACTION=configure MODE=perform

Once the database is configured, issue the following commands to configure the OMS.

$ cp /etc/oraInst.loc $ORACLE_HOME/oraInst.loc
$ export PERL5LIB=$OMS_HOME/perl/lib/5.6.1
$ $OMS_HOME/perl/bin/perl $OMS_HOME/sysman/install/ConfigureGC.pl /u01/app/oracle/product

Both configuration steps can take quite some time, so be patient.

The OMS configuration includes configuration of the Agent. The last part of this configuration is an attempt to start the Agent. If the agent fails to start with a timezone error, enter the correct value for the "agentTZRegion" parameter in the "$AGENT_HOME/sysman/config/emd.properties" file, delete the following files and start the agent.

$ rm -r $AGENT_HOME/sysman/emd/state/*
$ rm -r $AGENT_HOME/sysman/emd/collection/*
$ rm -r $AGENT_HOME/sysman/emd/upload/*
$ rm $AGENT_HOME/sysman/emd/lastupld.xml
$ rm $AGENT_HOME/sysman/emd/agntstmp.txt
$ $AGENT_HOME/bin/emctl start agent

The Grid control is now configured.

Check the Status of the Grid Control

The following command checks the status of the OMS.

$ $OMS_HOME/bin/emctl status oms
Oracle Enterprise Manager 10g Release 5 Grid Control  
Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
Oracle Management Server is Up.

The following command check the status of the agent on the Grid Control server.

$ $AGENT_HOME/bin/emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control  
Copyright (c) 1996, 2009 Oracle Corporation.  All rights reserved.
Agent Version     :
OMS Version       :
Protocol Version  :
Agent Home        : /u01/app/oracle/product/agent10g
Agent binaries    : /u01/app/oracle/product/agent10g
Agent Process ID  : 19785
Parent Process ID : 19767
Agent URL         : https://ol5-10gr5-gc.localdomain:3872/emd/main/
Repository URL    : https://ol5-10gr5-gc.localdomain:1159/em/upload
Started at        : 2012-07-21 22:49:43
Started by user   : oracle
Last Reload       : 2012-07-21 22:49:43
Last successful upload                       : 2012-07-21 22:51:20
Total Megabytes of XML files uploaded so far :    12.97
Number of XML files pending upload           :        0
Size of XML files pending upload(MB)         :     0.00
Available disk space on upload filesystem    :    50.54%
Last successful heartbeat to OMS             : 2012-07-21 22:50:49
Agent is Running and Ready

To access the grid control, use the URL specified in the "$OMS_HOME/sysman/setupinfo.txt" file. In my case the URL is shown below.


Grid Control

Starting and Stopping Grid Control Services

The following script shows how the whole grid control is started and stopped.

# Start everything
$OMS_HOME/opmn/bin/opmnctl startall
$AGENT_HOME/bin/emctl start agent

# Stop everything
$AGENT_HOME/bin/emctl stop agent
$OMS_HOME/opmn/bin/opmnctl stopall

The dbstart and dbshut commands require the "/etc/oratab" file to be editied to allow auto startup/shutdown.

By default, the database supporting the repository is in NOARCHIVELOG mode.

For more information see:

Hope this helps. Regards Tim...

Back to the Top.